Sprocket Drum Bearing And Sprocket Reassembly And Remounting - Suzuki Katana 1100 Service Manual

7-35 CHASSIS
SPROCKET DRUM BEARING AND SPROCKET
• Install the bearing by using the special tool.
09913-75520: Bearing installer
• Apply grease to the bearing and oil seal lip.
99000-25030: SUZUKI super grease "A"
NOTE:
vVhen installing the rear sprocket on its mounting drum, the
stamped mark on the sprocket is positioned outside.
• Tighten the sprocket mounting nuts to the specified torque.
Tightening torque: 48 - 72 N'm
(4.8 - 7.2 kg-m, 35.0 - 52.0 Ib-ft)
BRAKE DISC
• Make sure that the brake disc is clean and free of any greasy
nlattf,r
• Apply Thread Lock "1360" to the disc bolts and tighten them
[() the specified torque.
99000-32130: Thread Lock "1360"
Tightening torque: 15 - 25 N·m
(1,5 - 2.5 kg-m. 11.0 - 18.0 Ib-ft)
\,
\
TIGHTENING TORQUE
. . . - _. - -------,.------r-----....,--------.,
It8111
N·m "kg-m Ib-ft
- .
--_.- --_.~---_
. . .
_ - - - ­
1.94-127
~.:...~-
__
~~.~?L6~.-~=
_9
~.
0_
"I
BrdKf:
~;aliper
I
25 - 40
mourltlflg bolt 2.5 - 4.0
L~~'~~~:~O
forqLIt" link nut
22 - 33
!
2.2 - 3.3
I
16.0 - 24.0
ADJUSTMENT
• f\(JJust the chain slack after rear wheel installation. (Page
.2
1 1)