Engine Removal And Reinstallation - Suzuki Katana 1100 Service Manual

r
3-3 ENGINE
ENGINE REMOVAL AND REINSTALLATION
ENGINE REMOVAL
Before taking the engine out of the frame, wash the engine with
a steam cleaner. The procedure of engine removal is sequen­
tially explained in the following steps, and engine installation
is effected by reversing the removal procedure.
• Remove the seat.
• Remove the left and right frame covers.
• Remove the lower fairing.
• Disconnect the battery 81ead wire from the battery terminal.
• Remove the fuel tank mounting bolts
CD.
• Lift the fuel tank, and then disconnect the two fuel hoses
0
and vacuum hose
CD
from the fuel cock.
NOTE:
Do not lose the fuel hose clips.
• Disconnect the fuel level gauge sending unit lead wires, and
remove the fuel tank.
• Remove the left and right air cleaner case mounting screws
0·
• Loosen each carburetor clamp screw
CD
at the air cleaner
side.
• Remove the breather hose
@,
and then remove the air
cleaner case assembly.
NOTE:
Do not lose the breather hose clips.
"