Engine Disassembly - Suzuki Katana 1100 Service Manual

ENGINE 3-10
ENGINE DISASSEMBLY
• Remove the oil filter by using the special tool.
09915-40611: Oil filter wrench
NOTE:
Refer to page 2-8 for installation procedures.
• Remove the cylinder head cooling oil hoses by removing the
bolts.
• Remove the cylinder head cover by removing the bolts.
09914-25811: 6 mm "T' type hexagon wrench
• Remove the signal generator cover by removing the bolts.
09911-73730: 5 mm "T" type hexagon wrench
• Remove the spring holder bolt and spring, and then remove
the cam chain tensioner by removing the bolts.
09911-73730: 5 mm "T' type hexagon wrench
• Remove the cam chain idler by removing the bolts.