Caliper Inspection; Caliper Reassembly And Remounting - Suzuki Katana 1100 Service Manual

CHASSIS 7-12
CALIPER INSPECTION
Inspect the caliper bore wall for nicks, scratches or other
damage.
Inspect the piston surface for any scratches or other damage.
Inspect each rubber part for damage and wear.
00
,
~'
! -------------­
CALIPER REASSEMBLY AND REMOUNTING
Reassemble and remount the caliper in the reverse order of
I
removal and disassembly. Pay attention to the following points:
CAUTION:
*
Wash the caliper components with fresh brake fluid
before reassembly.
*
Never use cleaning solvent or gasoline to wash them.
*
Apply brake fluid to the caliper bore and piston to be
inserted into the bore.
CALIPER BOLTS
Tighten the bolts to the specified torque.
Item N·m kg-m
I
Ib-ft
1-------------------+-------+-----------+--:--.------­
Brake hose union
20-25 2.0-2.5
~14.5-18.0
~_aliPer
mount-ing bolt
_~_~rr2"~~--.~--.O ~9~~ ~~1~_~0
Caliper housing bolt 18-23 I I 1.8-2.3 I 13.0-16.5
CAUTION:
Bleed air after reassembling the caliper. (Refer to page 2-15.)