Setting Up; Arrangement - InFocus IN5122 User Manual

Setting up

Install the projector according to the environment
and manner the projector will be used in.
For special installation applications such as a
ceiling mount application, specific mounting
accessories (Specifications in the Quick Start
Guide) and service may be required. Before
installing the projector, consult with your dealer
about your installation application.

Arrangement

Refer to the following tables T-1 and T-2 in the Quick Start Guide to determine
the screen size and projection distance. The values shown in the table are
calculated for a full size screen.
Ⓗ × Ⓥ : Screen size
ⓐ : Projection distance
(from the projector's end)
ⓑ , ⓒ : Screen height
WARNING ►Install the projector where you can access the power
outlet easily. If anything unusual occurs, unplug the projector immediately. Other-
wise this may result in a fire or electrical shock.
►Do not subject the projector to unstable conditions. If the projector falls or
topples over, it could result in personal injury, and/or damage to the projector and
surrounding items. Using a damaged projector can result in a fire and an electrical
shock.
• Do not place the projector on unstable surfaces, such as an inclined surface,
surfaces subject to vibration, on top of a wobbly table or cart, or a surface that is
smaller than the projector.
• Do not position the projector on its side, front or rear.
• Do not attach or place anything on the projector unless otherwise specified in
the manual.
• Do not use any mounting accessories except the accessories specified by the
manufacturer. Read and keep the manuals of the accessories used.
• For special installations such as ceiling mounting, be sure to consult your dealer
beforehand.
(continued on next page)
Setting up
Projector top
Projector
bottom
7