InFocus IN5122 User Manual page 33

Item
COLOR
TEMPERATURE
COLOR
TINT
Using the ▲/▼ buttons switches the color temperature mode.

1 HIGH
6 CUSTOM
6 Hi-BRIGHT-3

5 CUSTOM
To adjust CUSTOM
Highlighting a CUSTOM mode and then
pressing the ► or the SELECT button
will display a dialog to help you adjust the
OFFSET and GAIN of the selected mode.
OFFSET adjustments change the color intensity of the test pattern's
whole tones.
GAIN adjustments mainly affect color intensity on the test pattern's
brighter tones.
Choose an item using the ◄/► buttons, and adjust the level using
the ▲/▼ buttons.
You can display a test pattern to check your adjustments by pressing
the SELECT button.
Each time you press the SELECT button, the pattern changes as below.
No pattern ð Gray scale of 9 steps
Ramp  Gray scale of 15 steps
• Lines or other noise may appear on the screen
when this feature is operated, but this is not a
malfunction.
Using the ◄/► buttons adjusts the strength of whole color.
Weak ó Strong
• This item can only be selected for a video, S-video and component
video signal.
• For an HDMI™ signal, this item can also be selected if either (1) or (2) ap-
plies.
(1) HDMI FORMAT has been set to VIDEO in the INPUT menu.
(2) HDMI FORMAT has been set to AUTO in the INPUT menu, and
the projector recognizes the HDMI™ video signal.
Using the ◄/► buttons adjusts the tint.
Reddish ó Greenish
• This item can only be selected for a video, S-video and component
video signal.
• For an HDMI™ signal, this item can also be selected if either (1) or (2)
applies.
(1) HDMI FORMAT has been set to VIDEO in the INPUT menu.
(2) HDMI FORMAT has been set to AUTO in the INPUT menu, and
the projector recognizes the HDMI™ video signal.
Description

1 CUSTOM

5 Hi-BRIGHT-2 4 CUSTOM
PICTURE menu

2 MID 2 CUSTOM
3 LOW
3 CUSTOM

4 Hi-BRIGHT-1
31