InFocus IN5122 User Manual page 60

NETWORK menu
Item
SETUP
(continued)
(continued on next page)
58
Use the ▲/▼/◄/► buttons to enter the IP
ADDRESS.
This feature can only be used when DHCP is set
to OFF.
• The IP ADDRESS is the number that identifies
IP ADDRESS
this projector on the network. You cannot have two
devices with the same IP ADDRESS on the same
network.
• The IP ADDRESS "0.0.0.0" is prevented.
Use the ▲/▼/◄/► buttons to enter the same
SUBNET MASK used by your computer.
SUBNET
This feature can only be used when DHCP is set
MASK
to OFF.
• The SUBNET MASK "0.0.0.0" is prevented.
Use the ▲/▼/◄/► buttons to enter the DEFAULT
GATEWAY (a node on a computer network that
serves as an access point to another network)
DEFAULT
address.
GATEWAY
This feature can only be used when DHCP is set
to OFF.
Use the ▲/▼/◄/► buttons to input the DNS
server address.
DNS SERVER
The DNS server is a system to control domain
names and IP addresses on the Network.
Use the ▲/▼ buttons to enter the TIME
DIFFERENCE.
Set the same TIME DIFFERENCE as the one set
TIME
on your computer. If you are unsure of this setting,
DIFFERENCE
consult your IT manager.
Use the ► button to return to the menu after
setting the TIME DIFFERENCE.
Use the ▲/▼/◄/► buttons to enter the Year (last
two digits), Month, Date, Hour and Minute.
• The projector will override this setting and retrieve
DATE AND
DATE AND TIME information from the Time server
TIME
when SNTP is enabled. (  Date/Time Settings
in the Network Guide)
Description