Item
CUSTOM KEY
SOURCES
POWER-UP
SOURCE
This item assigns one of the following features to CUSTOM on the
remote control (6).
(1) Use the ▲/▼ buttons on the CUSTOM KEY menu to select a
CUSTOM KEY and press the ► or SELECT button to display the
CUSTOM KEY setup dialog.
(2) Then using the ▲/▼/◄/► buttons sets one of the following
features to the chosen button. Press the SELECT button to save
the setting.
• BLANK: Displays an empty screen.
• MUTE Turns off all sound.
• ASPECT RATIO: Sets the ratio of image width to image height.
• SOURCE: Cycles through available sources.
• AUTO IMAGE: Resychronizes the projector to the source.
• FREEZE: Pauses the projected image.
• MAGNIFY: Magnifies the projected image.
• SOURCE INFO: The default action. Shows the Source Info
menu.
• SERVICE INFO: Shows the Service Info menu.
• AV MUTE: Turns the image and audio on and off.
• RULED LINES: Makes the pattern selected in the RULED
LINES item appear or disappear.
• SLIDESHOW: Selects the USB TYPE A input, and starts a Slideshow.
• MY IMAGE: Displays the MY IMAGE menu.
• MESSENGER: Turns the messenger text displayed on the screen on
and off (Messenger Feature in the Network Guide).
When there is no transferred text data to display, the message
"NO MESSENGER DATA" appears.
• AUTO KEYSTONE: Performs automatic keystone distortion
correction.
• ACTIVE IRIS: Changes the active iris mode.
• RESET FILTER HOURS: Displays the filter hours reset confirmation
dialogue.
• RESOLUTION: Turns the RESOLUTION dialog on and off.
• MIC VOLUME: Turns the MIC VOLUME dialog on and off.
• LOW POWER: Turns the LOW POWER dialog on and off.
Enables or disables Source Keys on the optional Commander-2
remote.
Determines which source the projector checks first for active
video during power-up.
Description
OPTION menu
51