InFocus IN5122 User Manual page 42

Item
POWER SAVING
MODE
MONITOR OUT
DEFAULT
40
Using ▲/▼ buttons switches the power saving mode setting
between ENABLE and DISABLE.
ENABLE ó DISABLE
When ENABLE is selected, the power consumption in the power
saving mode is lowered with some functional restrictions as per
below:
• When ENABLE is selected and the projector is in power saving
mode, all RS-232C communication control commands are disabled
except for the projector's power on command. If COMMUNICATION
TYPE is set to NETWORK BRIDGE in the COMMUNICATION
menu, all of the RS-232C commands are disabled (53).
• When ENABLE is selected and the projector is in power saving
mode, the AUDIO SOURCE>STANDBY setting (41) is overridden,
and no audio is output from AUDIO OUT port.
• When ENABLE is selected and the projector is in power saving
mode, the MONITOR OUT DEFAULT>STANDBY setting is
overridden, and no signal is output from MONITOR OUT port.
When the image signal from the input port chosen in step (1) is
projected, the image signal from the input port selected in step (2) is
output to the MONITOR OUT port.
(1) Choose an image input port using ▲/▼ buttons.
Choose STANDBY to select the image
output in the power saving mode.
(2) Select one of the COMPUTER IN ports
using ◄/► buttons.
Select OFF to disable the MONITOR OUT
port for the input port or power saving mode
chosen in the step (1).
• You cannot select COMPUTER IN1 and COMPUTER IN2 for step (1)
and step (2) respectively (or vice versa).
Description
SETUP menu