Setting An Access Password (Security Lock) - InFocus P111 User Manual

Setting an Access Password (Security Lock)

You can use the four arrow buttons on the remote to set a password and prevent unauthorized use of
the projector. When enabled, the password must be entered after you power on the projector. (See
Navigating the OSD
menus.)
Important:
Keep the password in a safe place. Without the password, you will not be able to use the projector.
If you lose the password, contact InFocus Support for information on clearing the password.
1.
Press the MENU button to open the
OSD menu.
2.
Press the ◄► buttons to move to the
Settings 1 menu. Press the ▲▼
buttons to select Advanced 1.
3.
(Enter) or ► to enter the
Press
Advanced 1 sub menu. Press the
▲▼ buttons to select Security Lock.
Press the ◄► buttons to enter and
4.
enable or disable security lock
function.
A password dialog box automatically
appears.
on page 17 and Setting the OSD Language
IN3144_IN3146_IN3148HD User's Manual
on page
— 13 —
18 for help on using OSD