InFocus IN5122 User Manual page 12

Setting up
Connecting with your devices (continued)
Computer
NOTE
• Before connecting the projector to a computer, consult the computer's
manual and check the compatibility of the signal level, the synchronization
methods and the display resolution output to the projector.
- Some signals may require an adapter to plug into this projector.
- Some computers have multiple screen display modes that may include some
signals which are not supported by this projector.
- Although the projector can display signals with resolutions up to WUXGA
(1920X1200), the signal will be converted to the projector's panel resolution
before being displayed. The best display performance will be achieved if the
resolutions of the input signal and the projector panel are identical.
• If you connect this projector and a notebook computer, you need to output the
display to an external monitor, or output simultaneously to the internal display
and an external monitor. Consult the computer's manual for the setting.
• Depending on the input signal, the projector's automatic adjustment feature
may take some time and may not feature correctly.
- A composite sync signal or sync-on-green signal may confuse the projector's
automatic adjustment feature (35).
- If the automatic adjustment feature does not work correctly, you may not
see the dialog to set the display resolution. In this situation, use an external
display device. You may be able to see the dialog and set an appropriate
display resolution.
(continued on next page)
10