InFocus IN5122 User Manual page 41

Item
KEYSTONE
CORNER
CORRECTION
LOW POWER
CEILING
REAR
(continued on next page)
Using the ◄/► buttons corrects the vertical keystone distortion.
Shrink the right side of the image ó Shrink the left side of the
image.
• The adjustable range of this feature will vary based on the input.
For some inputs, this feature may not work well.
• When the horizontal lens shift is not set to the center, this feature
may not work well.
• This feature is unavailable when the TRANSITION DETECTOR
(67) is ON or the screen is adjusted by CORNER CORRECTION
(24).
Selecting this item displays the CORNER CORRECTION dialog.
For details, refer to CORNER CORRECTION in Correcting the
distortion (24).
• This feature is unavailable when the TRANSITION DETECTOR is
ON (67).
Using the ▲/▼ buttons turns LOW POWER on and off.
ENABLE ó DISABLE
• When the ENABLE is selected, acoustic noise and screen
brightness are reduced.
Using the ▲/▼ buttons switches the ceiling mode.
ENABLE ó DISABLE
If the TRANSITION DETECTOR is ON and the CEILING status
changes, the TRANSITION DETECTOR ON alarm (67) will
display when projector is hard-powered off (AC power is turned off)
and back on.
Using the ▲/▼ buttons switches the rear projection mode.
ENABLE ó DISABLE
If the TRANSITION DECTECTOR is ON and the REAR status
changes, the TRANSITION DETECTOR ON alarm (67) will
display when projector is hard-powered off (AC power is turned off)
and back on.
Description
SETUP menu
39