The Upnp Screen - ZyXEL Communications XMG3512-B10A User Manual

If you click
Sta tic DHC P C o nfig ura tio n
entry, the following screen displays.
Static DHCP: Static DHCP Configuration/Edit
Fig ure 52
The following table describes the labels in this screen.
Table 31 Static DHCP: Static DHCP Configuration/Edit
L ABEL
Active
Group Name
IP Type
Select Device Info
MAC Address
IP Address
OK
Cancel
8.4 T he UPnP Sc re e n
Universal Plug and Play (UPnP) is a distributed, open networking standard that uses TCP/IP for simple
peer-to-peer network connectivity between devices. A UPnP device can dynamically join a network,
obtain an IP address, convey its capabilities and learn about other devices on the network. In turn, a
device can leave a network smoothly and automatically when it is no longer in use.
See page 111
Chapter 8 Home Networking
in the
DESC RIPT IO N
Select to activate the connection between the client and the XMG.
Ena b le
Select the interface group name for which you want to configure static DHCP settings. See
Chapter 14 on page 171
This field displays
IPv4
allowed to select other type.
Select a device or computer from the drop-down list or select
a device's MAC address and IP address in the following fields.
If you select
Ma nua l Input
If you select
Ma nua l Input
your LAN with the MAC address that you will also specify.
Click to save your changes.
O K
Click to exit this screen without saving.
C a nc e l
for more information on UPnP.
XMG3512-B10A User's Guide
screen or the Edit icon next to a static DHCP
Sta tic DHC P
for how to create a new interface group.
for the type of the DHCP IP address. At the time of writing, it is not
, enter the MAC address of a computer on your LAN.
, enter the IP address that you want to assign to the computer on
117
to manually enter
Ma nua l Input