Becker Surround; Reset Settings; Mute - Becker Traffic Pro 7949 Operating Manual

Becker Surround

You can use this function to activate vir-
tual surround sound and select the vehi-
cle size to optimise the surround sound
function.
Note:
The Becker Surround function is not
available for medium wave or short
wave.
X Select in the sound
settings.
1019
Select and press the
X
rotary control/push button
switch virtual surround sound on ( )
or off ( ).
X Select or
(on = ).
Note:
Only one of the vehicle types in the list
can be active ( ).

Reset settings

You can reset all sound settings to the
default settings.
The following settings are reset to the
relevant default value:
• : All default settings are reset
to the initial value. The user-defined
setting is reset to zero.
• to centre setting
• to off
• to off
X Select
tings.
1020
to
Select to reset the sound settings
X
or to continue without making any
changes.
Select to reset the sound settings.

Mute

You can switch your Traffic Pro to mute,
i.e. switch off the sound from the current
radio/media source.
However, navigation announcements,
traffic announcements (if TP has been
activated) and other voice announce-
ments on the Traffic Pro continue to be
transmitted unaffected.
X Press the rotary control/push button
2 seconds.
in the sound set-
1021
Example of muted radio mode.
1022
Example of muted media mode.
General operation
and hold it down for at least
19