Installation - Emerson Pm8560 User Manual

Setup:
Pm8560 Setup
Figure 2-5: System JTAG Diagram

Installation

The Pm8560 module may be installed in any expansion slot on a baseboard. To attach the
module to your baseboard, follow these steps:
1 Line up the P11 through P14 connectors and the keying holes with the PMC connectors J11
through J14 and the keying pin on the baseboard. Press the module into place, making sure
that the connectors are firmly mated and the module front panel is fully seated in the
baseboard front panel.
Caution: Avoid damaging the front panel EMC gasket.
!
2-8
Pm8560 User's Manual 10006609-03