Unpacking And Installation; Reference Guide For Receiving, Unpacking, And Preparing For Installation; Equipment Inspection; Packing Material - Emerson Liebert CRV User Manual

Unpacking and installation

3.0 U
NPACKING AND INSTALLATION
3.1

Reference guide for receiving, unpacking, and preparing for installation.

DO NOT THROW AWAY!
WARNING
RISK OF TOP HEAVY UNIT FALLING OVER! IMPROPER HANDLING CAN CAUSE EQUIP­
MENT DAMAGE, INJURY, OR DEATH! READ ALL OF THE FOLLOWING INSTRUCTIONS
BEFORE ATTEMPTING TO MOVE, LIFT, REMOVE PACKAGING FROM, OR PREPARING
UNIT FOR INSTALLATION.
CAUTION
RISK OF SHARP EDGES, SPLINTERS, AND EXPOSED FASTENERS CAN CAUSE PERSON­
AL INJURY! ONLY PROPERLY TRAINED PERSONNEL WEARING APPROPRIATE SAFETY
HEADGEAR, GLOVES, SHOES, AND GLASSES SHOULD ATTEMPT TO MOVE, LIFT, RE­
MOVE PACKAGING FROM, OR PREPARING UNIT FOR INSTALLATION.
NOTICE
RISK OF OVERHEAD INTERFERENCE! CAN CAUSE UNIT AND/OR STRUCTURE DAM­
AGE! THE UNIT MAY BE TOO TALL TO FIT THROUGH A DOORWAY WHILE ON THE PAL­
LET. MEASURE THE UNIT AND DOORWAY HEIGHTS AND REFER TO THE INSTALLA­
TION PLANS PRIOR TO MOVING THE UNIT TO VERIFY CLEARANCES.
NOTICE
RISK OF UNIT DAMAGE IF IMPROPERLY STORED! KEEP THE UNIT VERTICALLY UP­
RIGHT, INDOORS, AND PROTECTED FROM DAMPNESS, FREEZING TEMPERATURES,
AND CONTACT DAMAGE.
3.1.1

Equipment Inspection

Upon arrival of the unit, and before unpacking, verify that the labeled equipment matches the Bill
of Lading. Carefully inspect all items for either visible or concealed damage. Damage should be
immediately reported to the carrier and a damage claim filed with a copy sent to Liebert Corpora­
tion or to your sales representative.
3.1.2

Packing Material

All material used to package this unit is recyclable. Please save for future use, or dispose of
the material appropriately.
3.2

Recommended Unit Handling Equipment

3.3

Handling the Unit While Packaged

S If possible transport the packaged unit using a fork lift or pallet jack; otherwise use a crane
with slings and spreader bars.
S If using a fork lift or pallet jack, make sure the forks (if adjustable) are spread to the widest
allowable distance to still fit under the pallet. Also, make sure the fork length is suitable for
the unit length.
S When moving the packaged unit with a fork lift or pallet jack, lift the unit from either end of
the pallet.
13
Unpacking and installation