INSTALLATION & SERVICE
2.1 REMOVAL/REPLACEMENT & INSTALLATION OF THE ETIB
2.1.1 Removal/Replacement of the Expansion Transmitter Interface Bd.
An installed ETIB option will contain the following parts:
1. Expansion Transmitter Interface Board (ETIB) (with removable Terminal Blocks)
2. Three #8-32 x 1/4" SEM Screws
3. Three #4-40 x 15/32" Standoffs
Figure 2 - Expansion Transmitter Interface Bd. Mounted on TeleFlow CPU Board
PIP-EXPTIBS
Section 2
Page 3
Expansion Transmitter Interface Bds.