Monitor:
Other Commands
Definition:
Definition:
Note:
Definition:
Definition:
Definition:
Definition:
Definition:
11-22
Pm8560 User's Manual
run
The run command runs the commands in an environment variable var.
run var [ ... ]
script
The script command runs a list of monitor commands out of memory. The list is an ASCII
string of commands separated by the
ters. <script address> is the starting location of the script.
script <script address>
A script is limited to 1000 characters.
showmac
The showmac command displays the Processor MAC addresses.
showmac
showpci
The showpci command scans the PCI bus and lists the base address of the devices.
showpci
sleep
The sleep command executes a delay of N seconds.
Delay execution for N seconds (N is a decimal value).
sleep N
version
The version command displays the monitor's current version number.
version
watchdog
The watchdog command sets the watchdog timer to a period (in seconds) specified by the
variable watchdog_period. To disable watchdog, change watchdog_period to zero. The
watchdog command only sets the specified watchdog_period when is it executed. When the
board is reset, even if the watchdog_period is set in the environment variable, it will default
to 10 seconds. To change the default, update the watchdog_period and place the watchdog
command in the bootcmd variable.
watchdog
character and terminated with the
;
10006609-03
charac-
;;