Print A Successful Raft - 3D Systems BFB-3000 Manual

BFB-3000 Set Up and Operations Manual
6.11

Print a successful raft

The raft supports the model during printing:
It is essential that a good raft is printed to guarantee a good build. Therefore the height of
the hot-end nozzle over the bed for the first layer is critical:
 If the nozzle is too far away from the bed, the filament will not stick to the bed
 If the nozzle is too low it will not be able to extruder the filament, and there is a risk
of damage to the bed and the nozzle.
Nozzle
Deposited
Filament
Document No: D100253
movement
SIDE VIEW
Nozzle
END VIEW
Model
Raft
Bed
41