Manual Move; Extruder Control; Home Tool Head; Settings - 3D Systems BFB-3000 Manual

BFB-3000 Set Up and Operations Manual
9.4.3

Manual move

 See "Manual move", page 18.
9.4.4

Extruder control

 See "Extruder control", page 37.
9.4.5

Home tool head

 Push 'Enter' to move all axes to their home position.
Make sure the bed is in position before homing the tool head. The bed
contains a sensor necessary for homing. Without the sensor, the
machine will drive the bed frame into the waste disposal stand-offs.
Repeated collisions will damage the machine.
9.4.6

Settings

 Push 'Enter' to enter the "Settings" menu:
See the following sections for descriptions on each setting.
Document No: D100253
> EXTRUDER OFFSETS
LEVEL BED
SET Z HEIGHT
SET BED TYPE
GENERAL SETTINGS
55