3D Systems BFB-3000 Manual page 69

BFB-3000 Set Up and Operations Manual
Push reel filament down
delivery tube, from the
nut end
Hold tube in a coil
to match the
natural bend of the
filament, making it
easier to push out
the trapped
segments of
filament.
Document No: D100253
Once all the trapped
segments have been
pushed out, continue
to push the reel
filament through so
that approximately
5 cm protrudes at
both ends. Then cut
the reel filament to
detach the
arrangement from
the reel.
69