Using The Tools Settings Menu - SMC Networks SMCD3GN2 User Manual

Using the Tools Settings Menu

Using the Tools Settings menu, you can reset the Gateway and restore the device's factory
default settings. To access the Tools Settings menu, click Tools in the menu bar. Figure 54
shows an example of the menu.
Note: To reboot the Gateway and retain any customized settings, use the Reboot menu (see
"Using the Reboot Menu to Reboot the Gateway" on page 99).
To reset the Gateway and restore its factory default settings:
1. Click Factory Reset. The warning message in Figure 55 appears.
2. Click OK to restore the Gateway's factory default settings or click Cancel to retain the
Gateway's current settings.
Configuring Your Gateway
Figure 54. Tools Settings Menu
98
SMCD3GN2 Wireless Cable Modem User Manual