SMC Networks SMCD3GN2 User Manual page 95

Configuring Email Alerts
The following procedure describes how to configure the Gateway to send email notifications.
This procedure assumes that your mail server is working properly.
1. In the Email/Syslog Alert menu, under Mail Server Configuration, enter the following
information:
– SMTP Server Address = IP address of the SMTP server that will forward the email
notification to recipients.
– Sender's Email Address = name that will appear as the sender in the email
notifications.
2. Under Mail Server Authentication, enter the following information:
– User Name = your email name.
– Password = your email password.
3. Under Recipient list, click Add. When the Recipient Adding menu appears (see Figure
52), enter the name of the person who will receive email notifications and the person's
email address, and then click Apply. (Or click Back to return to the Email/Syslog Alert
menu or Cancel to cancel any selections you made.) If you clicked Apply, the email
account is added to the Recipient list. To send email to additional email accounts (up to
4), repeat this step.
4. To change the settings for an email recipient, click the radio button to the left of the
recipient you want to change and click the Edit button. When the Recipient Adding menu
appears, edit the settings as necessary and click Apply.
5. To delete an email recipient, click the radio button to the left of the recipient and click
Delete. No precautionary message appears before you delete the email recipient.
6. Click Apply.
Configuring Your Gateway
Figure 52. Recipient Adding Menu
95
SMCD3GN2 Wireless Cable Modem User Manual