SMC Networks SMCD3GN2 User Manual page 33

Table 3. Web Management Interface Menus and Submenus
Note: Some menus and submenus described in this chapter may not apply to your
Gateway. Please check your Gateway's GUI to see which items are available.
Menu and Submenus
NAT > Port Forwarding
Firewall
Firewall > Access Control
Firewall > Special Application
Firewall > URL Blocking
Firewall > Schedule Rule
Firewall > Email/Syslog Alert
Firewall > DMZ
Tools
Tools > Reboot
Status
Status > Cable Status
Configuring Your Gateway
Description
Configure predefined and custom port forwarding settings to let Internet users
access local services such as the Web Server or FTP server at your local site.
Lets you enable or disable the Gateway's firewall. Submenus let you:
• Block traffic at the Gateway's LAN interfaces from accessing the Internet.
Detect port triggers for detect multiple-session applications and allow them to
•
pass the firewall.
• Block access to certain Web sites from local computers by entering either a full
URL address or keywords of the Web site.
Define schedule rules that work with the Gateway's URL blocking feature.
•
• Send email notifications or add entries to the syslog when traffic is blocked,
attempts are made to intrude onto the network, and local computers try to
access block URLs.
Configure a local client computer for unrestricted two-way Internet access by
•
defining it as a Virtual DMZ host.
Lets you reset the Gateway and return it to its factory default settings. The submenu
lets you:
Reboot the Gateway while keeping all overrides you made to the device's factory
•
default settings.
Shows the connection status of the Gateway interfaces, firmware, hardware
version numbers, illegal attempts to access your network, and information about
DHCP client PCs current connected to the Gateway. The submenu lets you:
• View cable initialization procedures, and cable downstream and upstream
status.
SMCD3GN2 Wireless Cable Modem User Manual
33
See Page
67
73
74
87
90
92
93
97
98
99
100
101