Configuring An Apple Macintosh Computer - SMC Networks SMCD3GN2 User Manual

5. Click the OK button to save your changes and close the dialog box.
6. Click the OK button again to save your changes.
Configuring an Apple
The following procedure describes how to configure TCP/IP on an Apple Macintosh running
Mac OS 10.2. If your Apple Macintosh is running Mac OS 7.x or later, the steps you perform
and the screens you see may differ slightly from the following. However, you should still be
able to use this procedure as a guide to configuring your Apple Macintosh for TCP/IP.
1. Pull down the Apple Menu, click System Preferences, and select Network.
2. Verify that the NIC connected to your SMCD3GN2 is selected in the Show field.
3. In the Configure field on the TCP/IP tab, select Using DHCP (see Figure 14).
4. Click Apply Now to apply your settings and close the TCP/IP dialog box.
Configuring Your Computer for TCP/IP
Figure 13. Properties Window
®
Macintosh
25
SMCD3GN2 Wireless Cable Modem User Manual
®
Computer