SMC Networks SMCD3GN2 User Manual page 79

Adding Customer-Defined Access Rules
Using the following procedure, you can define your own rules regarding the type of traffic
allowed from the Internet to the public LAN site.
1. In the Access Control menu, check Enable Access Control if it is not checked and click
the Apply button. The remaining fields in the menu become available.
2. Under Customer Defined Service Table, click the Add button. The Customer Defined
Access Rules menu appears (see Figure 44).
3. Complete the fields in the Customer Defined Access Rules menu (see Table 19).
4. Click Apply. (Or click Back to return to the Access Control menu or Cancel to cancel any
selections you made.) If you clicked Apply, the rule for the customer-defined rule is added
to the Customer Defined Service Table.
5. To configure additional access control rules for customer-defined services (up to 35,
including access rules for predefined services), repeat steps 2 through 4. When you finish,
click Apply in the Access Control menu to save your settings.
6. To change the rule for a customer-defined service, click the radio button to the left of the
rule you want to change and click the Edit button. When the Customer-Defined Access
Rules menu appears, edit the settings as necessary (see Table 19) and click Apply. Click
Apply in the Access Control menu to save your settings.
7. To delete a customer-defined rule, click the radio button to the left of the rule you want to
delete and click the Delete button. No precautionary message appears before you delete a
rule. Click Apply in the Access Control menu to save your settings.
Configuring Your Gateway
79
SMCD3GN2 Wireless Cable Modem User Manual