Set Modes; Set Mode Programming - Icom IC-V80 Instruction Manual

■ Set mode programming

The Set mode is used to change the settings of the trans-
ceiver s functions.
'
• Repeater tone • Tone squelch
frequency (p. 39)
frequency (p. 39)
• Operating mode (p. 42)
• DTMF TX key (p. 42)
• VOX time-out timer (p. 42)
• VOX delay (p. 41)
• Microphone gain (p. 41) • VOX gain (p. 41)
D Set mode operation
q Push [FUNC](M), and then [SET](8) to enter the Set mode.
w Push [] or [] to select the desired item.
e Rotate [VOL] to select the option or value.
r To exit the Set mode, push [# ENT].
• DTCS code (p. 39)
: Push
: Push
*Appears for only the U.S.A.
version transceivers.
NOTE: When the display type setting (pp. 27, 46) is set
to "CH" in the Initial Set mode, and accessing the Set
mode from the memory mode, most of Set mode items
do not appear.
• Weather alert* (p. 41)

SET MODES

• DTCS polarity (p. 39) • Frequency offset (p. 40)
• Reverse duplex functon (p. 40)
• Tuning step (p. 40)
• Scan resume setting (p. 40)
• Function key timer (p. 40)
• TX permission (p. 41) • LCD backlight (p. 41)
10
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
38