Frequency Set Example - Icom IC-A200 Instruction Manual

al
2 FREQUENCY SELECTION
i Frequency set example
The following is an example of how to select 126.125 MHz in the STBY window, and then transfer it to the USE window.
Rotate clock- I rm 1 1 mr Previously used frequencies appear.
Dies. (O (34.8¢ i2 4G
on Test
O) Select 126.40 (/7->COMM 1 nm 1 nm Rotate the large tuning knob to
MHz. ' ' Jj uy | uw iZ 6. be change the STBY window frequency
in 1 MHz steps.
OMM Rotate the small tuning knob to
©) on NeeI6 6} i | uf HH i e 6. i 5 change the STBY window frequency
in 50 kHz steps.
steps.
in 25 kHz steps.
The USE window frequency and the
@ Pun)
iZ B. id 5
i =] oY, 8a
STBY window frequencies are ex-
* DO NOT hold.
changed.