Initial Set Mode Programming - Icom IC-V80 Instruction Manual

10
SET MODES

■ Initial Set mode programming

The Initial Set mode can be accessed at power ON and al-
lows you to set seldom-changed settings, to suit your prefer-
ence and operating style.
• Key-touch beep (p. 44)
• Auto low power (p. 47)
• Battery protection
function (p. 47)
• Microphone simple
mode (p. 47)
43
• Time-out timer (p. 44)
• Auto repeater* (p. 44)
*Appears for only the U.S.A.
version transceivers.
• Select speed (p. 46) • Power save (p. 46)
D Initial Set mode operation
q While pushing and holding [] and [], turn the power
ON to enter the Initial Set mode.
w Push [] or [] to select the desired item.
e Rotate [VOL] to select the option or value.
r To exit the Initial Set mode, push [# ENT].
• Auto power-OFF (p. 44)
: Push
: Push
• LCD contrast (p. 46)
• Lockout (p. 45)
• Squelch delay (p. 45)
• DTMF speed (p. 45)
• Dial assignment (p. 45)
• Display type (p. 46)