D Dtmf Speed; Squelch Delay - Icom IC-V80 Instruction Manual

10
SET MODES
D Lockout
Selects the lockout type between repeater, busy and OFF.
• RLO.OF : Turns the function OFF (default).
• RLO.RP : The repeater lockout function inhibits transmitting when
the channel is busy, except while receiving a signal that
includes a matched tone.
• RLO.bU : The busy lockout function inhibits transmitting while re-
ceiving a signal.
D Squelch delay
Sets the squelch delay between short and long. The delay
prevents the squelch from repeatedly opening and closing
while receiving the same signal.
• Sqd. S : Sets the squelch delay to short (default).
• Sqd. L : Sets the squelch delay to long.
45

D DTMF speed

Selects a desired DTMF transfer speed.
• dtd. 1 : 100 msec. interval; 5.0 cps rate (default)
• dtd. 2 : 200 msec. interval; 2.5 cps rate
• dtd. 3 : 300 msec. interval; 1.6 cps rate
• dtd. 5 : 500 msec. interval; 1.0 cps rate
(cps=characters per second)
D Dial assignment
Selects whether or not to use [VOL] as a tuning control in-
stead of [] and []. When [VOL] functions as a tuning con-
trol, [] and [] function as volume controls.
• tOP.VO : Audio volume control (default)
• tOP.dI : Tuning dial
[VOL] and []/[] function as described below, depend-
ing on the option.
Option [VOL]
tOP.VO Volume control
tOP.di Tuning control
[]/[]
Tuning controls
Volume controls