Initial Set Mode Items - Icom IC-V80 Instruction Manual

■ Initial Set mode items

D Key-touch beep
Turns the key-touch beep ON (the beep level 1 to 3) or OFF.
• When changing the beep level, beeps sound at the level.
D Time-out timer
To prevent accidental prolonged transmission, the trans-
ceiver has a time-out timer. This function cuts transmission
OFF after 1–30 min. of continuous transmission.
To turn the function OFF, select "tot.OF."
• tot.OF : Turns the function OFF. (default)
• tot. 1–30 : If continuous transmission exceeds the selected period,
the transmission will be cut off.
D Auto repeater
The Auto Repeater function automatically turns ON or OFF
the duplex operation and the tone encoder. The offset and
(default: bEP. 2)
the repeater tone are not changed by the function. Reset
these settings, if necessary.
• RPt.OF
• RPt.R1
• RPt.R2
D Auto power-OFF
The transceiver can be set to beep and automatically turn
OFF, when no key operation occurs during a specified period.
• POF.OF
• POF.30/1H/2H : The transceiver is automatically turned OFF when
NOTE: The setting is maintained even after the trans-
ceiver is turned OFF by the auto power-OFF function. To
cancel the function, select "POF.OF."
SET MODES
U.S.A. version only
: Turns the function OFF.
: Activates for only duplex. (default)
: Activates for both duplex and tone.
: Turns the function OFF. (default)
no operation occurs during the selected period.
10
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
44