Set Modes; Set Mode Programming - Icom ic-80fx Instruction Manual

■ Set mode programming

The Set mode is used to change the settings of the trans-
ceiver s functions.
'
• Subaudible tone
frequency (p. 29)
• DTMF TX key (p. 31)
• VOX time-out timer (p. 31)
• VOX delay (p. 31)
• Tone squelch
frequency (p. 29)
: Push
: Push
• Microphone gain (p. 31)

SET MODES

D Set mode operation
q Push [FUNC](M), and then [SET](8) to enter the Set mode.
w Push [ ] or [ ] to select the item.
e Rotate [VOL] to select the option or value.
r To exit the Set mode, push [# ENT](MN.W).
• DTCS code (p. 29)
• VOX gain (p. 30)
8
• DTCS polarity (p. 29)
• Scan resume setting (p. 30)
• Function key timer (p. 30)
• LCD backlight (p. 30)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
28