Replacing The Internal Lithium Battery; Attaching The Tablet Sheets - Roland M-5000 Reference Manual

Placement and Setup
* If you need to turn off the power completely, first turn off the
unit, then unplug the power cord from the power outlet.
* When restarting the unit with the expansion interface installed,
wait for about one second before you turn on the power.

Replacing the Internal Lithium Battery

The M-5000 has an internal lithium battery that maintains the
units's clock function and preserves the mixer settings. If the
battery runs down, the clock function and recovery of mixer
settings before power-down can fail to operate correctly. If a popup
message prompting battery replacement appears after turning on
the power, follow the procedure below to replace the battery.
The type of the replacement lithium battery is CR2032. When
purchasing a replacement, specify a "CR2032 lithium battery" at an
electrical-appliance store or other such point of sale.
1.
Save the data in the M-5000.
0"Backing Up All Data in the M-5000" (p. 59)
2.
Turn off the power to the M-5000 and unplug the power
cord from the power outlet.
3.
Loosen the mounting screw for the BATTERY slot and
detach the BATTERY panel.
4.
Take out the old battery and replace it with a fresh one.
Press down on the battery to eject it.
Install so that the battery's "+" (plus) symbol faces back toward the
front.
+ (plus) symbol
NOTE
Be careful to avoid cutting your hand when opening.
5.
Attach the BATTERY panel and secure it in place using the
screw loosened in step 3.
6.
Turn on the power to the M-5000 and set the date and
time.
0"Setting the Date and Time" (p. 61)
7.
Restoring All Data in the M-5000
0"Restoring All Data in the M-5000" (p. 60)
22

Attaching the Tablet Sheets

Attach the tablet sheets to places shown below. They will protect
your tablet / smartphone / PC.