System Initial Setting [1]; Date & Time Setting [1] - Oce 3275 User Manual

Key Operator Mode

System Initial Setting [1]

Set the following initial conditions of the copier.
• Date & Time setting: Current date and time, summer time
• Language select setting: Language used in LCD (English)
• IP address setting: IP address to be accessed from PC
Date & Time Setting [1]
Set the current date and time, and also the summer time.
Default setting: Summer time off
System Initial Setting Menu Screen
1 Press [ ] to display the Help Screen, then touch
HELP
Enter a 4-digit key operator password, then touch
Mode Screen.
NOTE: If an invalid Key operator password is entered, continue by entering the valid 4-digit password.
2 Touch
[1] System initial setting
then touch
[1] Date & Time setting
3 Adjust the time.
The time indicated by the copier is displayed in the upper line and ordered by date,
month, year, and time (in 24-hour expression). In the lower line, the highlighted
section can be changed by using the keypad on the screen.
Touch to move the highlighted section to the number to be changed.
SET
4 To activate the summer time function, touch
time will gain an hour.
5 Touch to update the Present time by the Setting time and return to the System
OK
Initial Setting Menu Screen.
6 If no further changes are required, proceed to step 8.
7 If other system initial setting changes are required, touch the key.
8 Touch
PREVIOUS SCREEN
9 Touch
PREVIOUS SCREEN
Date & Time Setting Screen
to display the System Initial Setting Menu Screen,
to display the Date & Time Setting Screen.
Summer time
to restore the Key Operator Mode Screen.
to restore the Basic Screen to perform copying operations.
.
Key Operator Mode
to display the Key Operator
OK
to highlight it. The Present
Key Operator Mode 14-7