Table of Contents
Advertisement
Turning the Océ 31x5E on/off
The Océ 31x5E is turned on and off with the green on/off button next to the
paper compartment (see figure 1). If the machine has not been used for some
time (defined by the key operator) the Océ 31x5E will turn off (Classic) or go
into sleep mode (Eco). If it has turned off (Classic), users can turn it on again
themselves by pushing the green on/off button, provided the on/off button is
not locked with the optional key switch. The Océ 31x5E Eco wakes up when
you send an automatic print job or press a button on the operator panel.
The Automatic Shutdown and Sleep Mode functions can be customized
Note:
using the key operator system (see, 'Defining the Automatic Shtodown time and
sleep time' on page 35).
[1] On/off button and key switch
If you do not want other users to operate the copier, you must turn it off using
the key switch. When the key switch is used, the paper compartment door is
locked. If a paper jam occurs, the person in charge of the Océ 31x5E must be
notified. This person is the only one who can turn the copier on again.
Turning on
If available, insert the key into the key switch, turn it to the right (into
1
horizontal position), and remove it (see figure 1).
Press the green on/off button, which will then light up.
2
The copier takes about 8 minutes to warm up from a cold start. During this
time, you can check the paper stock and, if necessary, reload the paper trays.
12
Océ 31x5E Configuration and special maintenance
on/off button
key switch
Advertisement
Table of Contents
