Obihai OBi100 Administration Manual page 88

Interval
ConfigURL
DnsLookupType
DnsSrvPrefix
GPRM0 to GPRM7
TPRM0 to TPRM3
User Defined Macro 0–3
($UDM0 – $UDM3)
Value
ExpandIn
scheduled at the beginning. Or a random delay of 10- 70s..
When Method is set to Periodically, this is the number of
seconds between download from ConfigURL. If value is 0,
device downloads once only on system start (i.e., equivalent
to setting Method to System Start)
URL of config file
Control what type of DNS record to lookup. Available choices
are:
- A Record Only
- SRV Record Only
- - Try Both
Note: Option not available on OBi100/OBi110
Control whether to add a standard prefix to the domain
name when looking up a SRV Record. For HTTP and HTTPS,
the prefix to add is "_http._tcp.". For TFTP, the prefix to add
is "_tfto._udp."
Available choices are:
- No Prefix
- With Prefix
- Try Both
Note: Option not available on OBi100/OBi110
Non-volatile generic parameters which can be referenced in
other parameters, such as ConfigURL
Temporary variables used in scripts for ConfigURL. Please
refer to device provisioning guide for examples on how to
these variables.
The value can be any plain text or a valid canonical parameter name
preceded by a $ sign. For example:
$X_DeviceManagement.WebServer.Port
Note: Here you MUST NOT enclose the parameter name following
the $ sign with braces or parentheses.
This is a comma separated list of canonical parameter names,
where the macro expansion can be used. Up to 3 parameter names
may be specified. Specify ANY to allow the macro to expand in any
parameter. Example:
Copyright 2010-2013 Obihai Technology, Inc.
0
tftp://$DHCPOPT66/$MAC.xml
A Record Only
No Prefix
88