Obihai OBi100 Administration Manual page 101

Obi1 series, obi2 series, obi3 series
Hide thumbs Also See for OBi100:
Table of Contents

Advertisement

ITSP SIP Settings Parameter Guide:
Parameter
ProxyServer
ProxyServerPort
ProxyServerTransport
RegistrarServer
RegistrarServerPort
RegistrarServerTransport
UserAgentDomain
UserAgentTransport
OutboundProxy
OutboundProxyPort
X_OutboundProxyTransport
X_BypassOutboundProxyInCall
RegistrationPeriod
X_RegistrationMargin
Description
Host name or IP address of the SIP proxy
server
Destination port to connect to the SIP server
Transport protocol to connect to SIP server.
The three choices are UDP, TCP, or TLS
Hostname or IP address of the SIP registrar. If
a value is specified, device sends REGISTER to
the given server; otherwise REGISTER is sent
to ProxyServer
Destination port to connect to SIP registrar
Transport protocol to connect to registrar.
This parameter is reserved for future. The
only choice is UDP
CPE domain string. If empty, device uses
ProxyServer as its own domain to form its
AOR (Address Of Record) or Public Address
when constructing SIP messages (for
example, in the FROM header of outbound
SIP Requests).
Note: If SPx Service::URI is specified,
additional rules applied in forming the AOR.
See description of URI parameter for more
details and examples
Transport protocol for incoming call control
signalling. This parameter is reserved for
future. The only choice is UDP
Host name or IP address of the outbound
proxy. Outbound proxying is disabled if this
parameter is blank.
Destination port to be used in connecting to
the outbound proxy
Control the SIP transport for the outbound
proxy server which may be different from
that of the proxy server. Available choices
are:
-
UDP
-
TCP
-
TLS
-
Follow ProxyServerTransport
Note: Option not available on OBi100/OBi110
Enable this option to bypass the
OutboundProxy inside a SIP dialog.
Note: Option not available on OBi100/OBi110
Nominal interval between device register in
seconds
Number of seconds before current
registration expires that the OBi should re-
Register (e.g. 5s). If value is less than one, it is
Copyright 2010-2013 Obihai Technology, Inc.
Default Setting
5060
UDP
5060
UDP
UDP
5060
Follow ProxyServerTransport
No
60
101

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Obi110Obi200Obi302Obi202Obi300

Table of Contents