Obihai OBi100 Administration Manual page 79

WiFi Settings Parameter Guide:
Parameter
Basic Settings
Enable
PreferredAccessPoint
ShowAccessPointPassword
Internet Settings
AddressingType
IPAddress
SubnetMask
DefaultGateway
DNSServer1
DNSServer2
Access Point N
(N=1,2,...,20)
SSID
Password
SecurityEnabled
Description
Enable OBiWiFi feature. You must have an OBiWiFi dongle attached to the OBi
to use the feature
Indicate which access point to use when more than one remembered AP are
in range. Select from the list: None, Access Point 1, Access Point 2, ..., Access
Point 20.
This value is automatically populated with the last AP that OBi user chose to
connect explicitly from the device web page
Check this box and press submit to show all the AP passwords in (unmasked)
plain text (no reboot required). The passwords will be masked again following
a reboot of the device
The method to assign an IP address to this interface. Choose between DHCP or
Static
The IP address to use if AddressingType = Static
The subnet mask to use if AddressingType = Static
The default gateway to use if AddressType = Static
An additional DNS Server to use in addition to the ones received from DHCP
An additional DNS Server to use in addition to the ones received from DHCP
SSID of the access point
Password or pass-phrase based on the authentication method used by the AP.
For WPA, the pass-phrase should be no more than 64 characters. For WEP, the
password should be in one of the four formats: 10 HEX digits, 26 HEX digits, 5
ASCII characters, or 13 ASCII characters. The HEX digits can be upper or lower
case
This is a read only parameter. It indicates if the AP has security enabled or not
Copyright 2010-2013 Obihai Technology, Inc.
Default
Setting
Yes
None
No
DHCP
79