Obihai OBi100 Administration Manual page 117

Obi1 series, obi2 series, obi3 series
Hide thumbs Also See for OBi100:
Table of Contents

Advertisement

X_VMWIEnable
X_VMWIEnable2
MessageWaiting
AnonymousCallBlockEnable
AnonymousCallEnable
DoNotDisturbEnable
X_BridgedOutboundCallMaxDuration
X_AcceptDialogSubscription
X_AcceptLinePortStatusSubscription
X_SkipCallScreening
X_SMSNotify
X_XMPPPriority
X_GTalkSimultaneousRing
X_SRTP
VMWI signal on the PHONE2 port if X_VMWIEnable is set to Yes
Note: Option available on OBi202/OBi302 only
Enable Visual Message Waiting Indication for this service for the
PHONE port (or PHONE1 port)
Enable Visual Message Waiting Indication for this service for the
PHONE2 port
Note: Option available on OBi202/OBi302 only
This is a state rather than a configuration parameter, that
indicates if there are any new messages for this subscriber on
the service provider's voicemail system
Enable blocking of Anonymous Calls on this service. Anonymous
calls are rejected with a SIP 486 (Busy) response and Call
Forward On Busy service is not applied.
Note: It is possible for a user to set this parameter from the
phone using a Star Code
Enable masking of Caller-ID information for all outgoing calls. If
enabled, the called party should perceive the call as coming from
an anonymous caller.
Note: It is possible for a user to set this parameter from the
phone using a Star Code
Enable Do Not Disturb Service. If enabled, all incoming calls on
this service are treated as if the device is busy.
Note: It is possible for a user to set this parameter from the
phone using a Star Code
Limit on the call duration in seconds for all outbound calls that
are bridged from the same or another trunk. A blank or 0 value
implies the call duration is not limited.
Enable the device to accept SUBSCRIBE to this trunk's dialog
event package
Enable the device to accept SUBSCRIBE to the LINE port status
Note: Option available only on OBi110 and devices with an
attached OBiLINE USB adapter.
Enable the device to automatically skip call screening when the
underlying ITSP is Google Voice
Ring the phone on SMS reception from Google Voice and display
the first few characters of the message as Caller-ID
Note: Option available on OBi200/OBi202 only
XMPP Priority to assume by this client for Google Voice when
there are multiple clients using the same account. Valid values
are 0 (highest) or 32-127
Note: Option available on OBi200/OBi202 only
Ring all other clients using the same Google Voice account at
present.
Note: Option available on OBi200/OBi202 only
This is a drop down list with 3 choices:
Copyright 2010-2013 Obihai Technology, Inc.
No
No
No
No
No
No
No
No
Yes
No
0
Yes
Disable SRTP
117

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Obi110Obi200Obi302Obi202Obi300

Table of Contents