Obihai OBi100 Administration Manual page 105

X_UserEqPhone
X_CallWaitingIndication
3
X_Support100rel
X_DiscoverPublicAddress
X_UsePublicAddressInVia
X_PublicIPAddress
X_UseRport
X_UseCompactHeader
X_FaxPassThroughSignal
X_IncludeMessageHash
and _sip._tls. for SIP over TLS.
Include the parameter 'user=phone' in
Request-URI and To-URI of outbound INVITE.
Note: Option available on OBi100/110 only
Enable inclusion of an indication in a 18x
response to the calling peer if this is a call-
waiting situation.
Note: Option available on OBi100/110 only
Enable this option to turn on the support for
RFC3262 (reliable provisional SIP responses).
If enabled, OBi will announce this support in
a SIP Supported header, and will require a
caller to use this option if the caller also
supports this feature.
Enable this option to let the OBi use the
public IP address and port it has discovered
as its SIP Contact address
Enable the use of the discovered external IP
address (instead of the unit's assigned local
IP address) in outbound Via header
Note: Option not available on OBi100/110
A static public IPv4 address, if specified, will
be used by the OBi to form its SIP Contact
address
Enable this option to let the OBi insert a
blank rport parameter in the VIA header our
outbound SIP messages. This option should
be turned off if you are using port forwarding
on the external router to route inbound SIP
messages to the OBi
Enable the use of compact form SIP message
header names.
Note: Option not available on OBi100/110
Select the signaling method to indicate to the
peer to switch to FAX passthrough. Available
choices are:
- ReINVITE
- RFC2833
- Auto
- None
Enable the inclusion of a X-MD5-Hash header
in outbound SIP messages and x-md5-hash
attribute in outbound SDP. The header
contains the MD5 hash of all the other SIP
message headers; the attribute contains the
MD5 hash of all theo ther SDP attributes.
These data can be used by the recipient to
Copyright 2010-2013 Obihai Technology, Inc.
No
No
No
Yes
No
Yes
No
ReINVITE
No
105