Obihai Obi300 Quick Start Manual

Hide thumbs Also See for Obi300:

Download this manual

Obihai ATAs Power Light Statuses

- Red- Not Connected- potential reason being a Faulty AC Adapter

- Blinking Red- Applying firmware. Do not unplug the ATA during this process as chances are

this will render the device unusable. If this happens and the device becomes unusable the pow-

er light will alternate red and green.

- When you see the power light alternating red and green this is an indicating factor that

the device is unusable. We commonly see this when the device is unplugged during

a firmware application. If this is happening, please reach out to Granite's NOC

(844-4786621) to work on a resolution.

- Blinking Green- Device not receiving an IP. ObiHai ATAs are auto configured with DHCP. The

blinking green light indicated that something is preventing the device from getting its IP.

clienttraining@granitenet.com | 866.847.1500 |

ObiHai Obi300 and

Obi302 ATA's

Granite Telecommunications

Page 1 If this is happening, please reach out to Granite’s NOC (844-4786621) to work on a resolution. - Blinking Green- Device not receiving an IP. ObiHai ATAs are auto configured with DHCP. The blinking green light indicated that something is preventing the device from getting its IP.
Page 2 Obi302 ATA’s Ports on the Back of an ObiHai ATA ObiHai devices shown – Obi300 and Obi302. Obi300 supports one analog line (1 port) and Obi302 supports 2 analog lines (2 ports). A frequently asked question in regards to these devic- es are where to plug the router into.

Obi302