Obihai OBi100 Administration Manual page 207

Call Progress Tones
Star Code Configuration
Interfaces & Indicator Lights
Internet (WAN)
Phone (FXS)
Reset Button
LEDs
LED Indications
Certifications
FCC Part 15
A-Tick
CE
Anonymous Call
Do Not Disturb
Call Return
Repeat Dialing
Configurable Call Progress Tone
Call Progress Tone Profiles (2)
Dial Tone
Busy Tone
Ringback Tone
Reorder Tone
Confirmation Tone
Holding Tone
Second Dial Tone
Stutter Tone
Howling Tone
Prompt Tone
Call Forwarded Tone
Conference Tone
SIT Tones (1-4)
Ringing & Call Waiting Tone Configuration
Ring Patterns (10) - Configurable
Call Waiting Tone Patterns (10) - Configurable
Call Waiting Tone Pattern Profiles (2)
Configurable Start Codes
Star Code Profiles (2)
Redial
Call Return
Activate Block Caller ID
Deactivate Block Caller ID
Block Caller ID Once
Unblock Caller ID Once
Activate Call Forwarding (All Calls)
Deactivate Call Forwarding (All Calls)
Activate Call Forward on Busy
Deactivate Call Forward on Busy
Activate Call Forward on No Answer
Deactivate Call Forward on No Answer
Activate Block Anonymous Calls
Deactivate Block Anonymous Calls
Activate Call Waiting
Deactivate Call Waiting
Activate Do Not Disturb
Deactivate Do Not Disturb
Activate Repeat Dial
Deactivate Repeat Dial
1 x 10/100BaseT Ethernet Port (802.3)
1 x RJ-11 FXS Analog Phone Port
Yes – Located on Bottom of Case
3 – Power + Status, Ethernet Activity, Phone
Power On, Device Status, Upgrade in Progress Status, Packet RX/TX, Phone Port Status
Yes – Class B
Yes
Yes
Copyright 2010-2013 Obihai Technology, Inc. 207