Obihai OBi100 Administration Manual page 127

User Prompts Parameter Guide:
Parameter Description
User<N>Description A text string that describes the contents of this user
prompt
<N> = 1-10
User<N>Length This is a read-only status parameter. It shows the
space occupied by this prompt in number of
<N> = 1-10 milliseconds
SpacedUsed This is a read-only status parameter. It shows the
amount of recording space used in number of
milliseconds
SpaceAvailable This is a read-only status parameter. It shows the
amount of recording space remaining in number of
milliseconds
Auto Attendant Parameter Guide:
Parameter Description
Enable Enable AA. If enabled, the AA will answer an
incoming call that has been routed to it after a
period as specified in AnswerDelay. If disabled, the
AA will not attempt to answer any incoming call.
DigitMap Once the AA answers an incoming call, it presents
the caller with an option to make a further call
using one of the available voice services on the
device. This Digit map serves to restrict the
numbers that can be dialed or called via this AA
option.
See OBi Call Routing and Digit Map Section for a
description of the syntaxes to specify a digit map.
OutboundCallRoute After the caller dials a number that is acceptable by
the AA (according to its DigitMap) to make a further
call, the device uses this outbound call routing rule
to determine which service to make this call with.
See OBi Call Routing and Digit Map Section for a
description of the syntaxes to specify this
parameter
Note that while forking to multiple numbers in an
AA outbound call routing rule is not supported on
OBi100 and OBi110, it is supported on the OBi202.
For example, on the OBi202 you may have a rule
Copyright 2010-2013 Obihai Technology, Inc.
Default Setting
Default Setting
Yes
For OBi100:
([1-9]x?*(Mpli)|[1-9]|[1-9][0-9]|
<00:$1>|0|**1(Msp1)|
**2(Msp2)|**9(Mpp)|(Mpli))
For OBi110:
([1-9]x?*(Mpli)|[1-9]|[1-9][0-9]|
<00:$1>|0|**1(Msp1)|
**2(Msp2)|**8(Mli)|**9(Mpp)|
(Mpli))
For OBi200/202/300/302:
([1-9]x?*(Mpli)|[1-9]|[1-9][0-9]|
<00:$1>|0|**1(Msp1)|
**2(Msp2)|**3(Msp3)|
**4(Msp4)|**70(Mli)|**8(Mbt)|*
*81(Mbt)|**82(Mbt2)|
**9(Mpp)|(Mpli))
For OBi100:
{([1-9]x?*(Mpli)):pp},
{0:ph},
{(<**1:>(Msp1)):sp1},
{(<**2:>(Msp2)):sp2},
{(<**9:>(Mpp)):pp},
{(Mpli):pli}
For OBi110:
{([1-9]x?*(Mpli)):pp},
{0:ph},
{(<**1:>(Msp1)):sp1},
{(<**2:>(Msp2)):sp2},
{(<**8:>(Mli)):li},
{(<**9:>(Mpp)):pp},
{(Mpli):pli}
For OBi:202/OBi302:
127