Obihai OBi100 Administration Manual page 85

Automatic Firmware Update & Provisioning
Auto Provisioning Parameter Guide:
Parameter
Auto Firmware Update
Method
Description
Current operational method of auto firmware updating.
Available choices are:
- Disabled = Do not check for f/w upgrade from
FirmwareURL
- System Start = Check for f/w upgrade from
FirmwareURL just once on system start
- Periodically = Check for f/w upgrade from
FirmwareURL on system start, and then periodically
at the interval specified in the Interval paramter
Note: First f/w upgrade check on system start will be
performed after a random delay of 0-30s
Copyright 2010-2013 Obihai Technology, Inc.
Default Setting
Disabled
85