Obihai OBi100 Administration Manual page 106

X_EchoServer
X_EchoServerPort
X_EnableRFC2543CallHold
ITSP RTP Settings Parameter Guide:
Parameter
RTP
LocalPortMin
LocalPortMax
KeepAliveInterval
DSCPMark ∞
X_UseSSL
RTCP
Enable
TxRepeatInterval
LocalCName
determine if the message has been modified
by an intermediary (such as a SIP ALG)
Note: Option available on OBi100/110 only
Name or IP address of an echo server for SIP
ALG detection
Listening of the echo server for SIP ALG
detectiion
Enable interpretation of call hold indication
per RFC2543
Note: Option not available on OBi100/110
Description
Base of port range for tx/rx RTP with this SP
Top of port range for tx/rx RTP with this SP
Interval in seconds between sending keep alive
packet on an RTP channel that is currently in idle (due
to call hold for instance). RTP keepalive is disabled if
the value of this parameter is set to 0.
Diffserv code for outgoing RTP packets with this SP
Enable this option to force OBi to send RTP over a SSL
channel when the ITSP is Google Voice
Enable RTCP
RTCP packet transmission interval in milliseconds
The canonical name to use in RTCP messages. If
blank, the device will use
Copyright 2010-2013 Obihai Technology, Inc.
Default Setting
16600
16798
0
0
No
No
10000
106