Obihai OBi100 Administration Manual page 114

X_AcceptResync
active call to leave voicemail. Requires a va
attribute with the target mailbox ID, such as "00",
"01", ..., as the value
o
"Send To Park": Blind transfer the current call to a
parking lot partition. Requires a va attribute with
the parking lot partition mask, such as "0*", "1*",
"**", ... as the value
o
"Monitor VM": Monitor if new voicemail available
in a mailbox. Requires a va attribute with the target
mailbox ID, such as "00", "01", ... as the value
o
"Monitor Park": Monitor a parking lot partition.
Requires a va attribute with the target parking lot
partition mask, such as "0*", "1*", "**", ... as the
value
o
"Monitor Night Mode": Monitor the system's
day/night mode status. No va attribute required.
o
"Auto Night Mode": Monitor if the system's auto
day/night mode switching feature is active. No va
attribute required
o
"Sign On/Off": Let user sign on/off an extension.
Requires a va attribute with the extension number
to sign on/off as the value, such as "101"
- va: Required if the function code requires it. This attribute
must be located somewhere between two bn attributes
- la: Optional. If present, it must be somewhere between two
bn attributes. A string label to display on the phone screen
next to the current function key. For example "$USER",
"Park", "Night". It should be no longer than 7 characters due
to space limitation. This attribute does not apply for a
sidecar button
Note: Other than "Ext 1" and the generic "Speed Dial" function,
all the other button functions are only applicable if the service
installed on this SP is from an OBiPLUS system.
This parameter is useful only if the X_Proxy parameter is
enabled. In that case, the OBi will provide a configuration file
based on the attributes given in this parameter, upon request
from an IP phone with the matching MAC address. The IP phone
must be installed on the LAN side of the OBi and must be one of
the following make/model:
- Cisco/SPA303
- Cisco/SPA504G
- Cisco/SPA508G
- Cisco/SPA509G
- Cisco/SPA525G
Note: Option not available on OBi100/OBi110
Control whether to accept a SIP NOTIFY request with
event=resync to trigger a reboot of the device (so it can
download new f/w or configuration upon boot up). Available
choices are:
- no (do not accept resync trigger)
- yes with authentication (accept after challenging the sender)
- yes without authentication (accept w/o challenging the
sender)
Copyright 2010-2013 Obihai Technology, Inc.
yes without
authentication
114