Obihai OBi100 Administration Manual page 115

SP"x" SIP Credentials
AuthUserName
AuthPassword
URI
SP"x" Calling Features
CallerIDName
MaxSessions
CallForwardUnconditionalEnable
Note: Option not available on OBi100/OBi110
The User ID to authenticate to a SIP UAS (User Agent Server)
when an outbound SIP request sent by the device is challenged
by the UAS with a 401 or 407 Response
The Password (corresponding to AuthUserName) to authenticate
to a SIP UAS (User Agent Server) when an outbound SIP request
sent by the device is challenged by the UAS with a 401 or 407
Response
This parameter affects the way the AOR is formed by the device
in outbound SIP Requests. The AOR has the format:
user@domain.
If the value of URI is empty, device gets the user portion of its
AOR from the AuthUserName, and the domain portion the value
of ITSP Profile's UserAgentDomain if it is not empty, or that of
the ProxyServer otherwise.
If the value URI is not empty and does not contain "@", it is used
as the user portion of the AOR while the domain portion is
formed the usual way.
If the value of URI contains "@', it is interpreted as a full AOR
and device takes it as the AOR as is.
Some Examples:
1) Let ProxyServer = sip.myitsp.com, AuthUserName =
4089991123, URI=[empty], UserAgentDomain=[empty], then
AOR = 4089991123@sip.myitsp.com
2) Change UserAgentDomain to users.myitsp.com, then
AOR = 4089991123@users.myitsp.com
3) Change URI to bobdylan, then
AOR = bobdylan@users.myitsp.com
4) Change URI to bobdylan@superusers.myitsp.com, then
AOR = bobdylan@superusers.myitsp.com
Note: In all cases, device uses AuthUserName and
AuthUserPassword to compute authorization if challenged by a
401 or 407 response.
Display name to identify the subscriber. The display name field is
usually inserted in a FROM header in outbound SIP requests
(such as INVITE) for the purpose of displaying a Caller ID Name
on the recipient's device.
The maximum number of simultaneous calls that may be
established on this service
Enable call forwarding of all calls unconditionally by the device. If
CallForwardUnconditionalNumber is blank, this parameter is
treated as if it has been set to No.
Note: It is possible for a user to set this parameter from the
Copyright 2010-2013 Obihai Technology, Inc.
2
No
115