Obihai OBi110 Administration Manual
  1. Manuals
  2. Brands
  3. Obihai Manuals
  4. Adapter
  5. OBi110
  6. Administration manual

Obihai OBi110 Administration Manual

Voice service bridge and terminal adapter; telephone adapter and voice service bridge; voip phone adapter with router, 2-phone ports, t.38 fax; voip phone adapter with router, 2-phone ports, t.38 fax (sip only)
Hide thumbs Also See for OBi110:
Table of Contents

Advertisement

Quick Links

See also: Admin Manual
Obihai Technology, Inc.
OBi Device Administration Guide
Models:
OBi110 – Voice Service Bridge and Terminal Adapter
OBi100 – Telephone Adapter and Voice Service Bridge
OBi202 – VoIP Phone Adapter with Router, 2-Phone Ports, T.38 Fax
OBi302 – VoIP Phone Adapter with Router, 2-Phone Ports, T.38 Fax (SIP Only)
Version 26.08.12 – 26 August 2012

Advertisement

Table of Contents
loading

Related Manuals for Obihai OBi110

Summary of Contents for Obihai OBi110

  • Page 1 Obihai Technology, Inc. OBi Device Administration Guide Models: OBi110 – Voice Service Bridge and Terminal Adapter OBi100 – Telephone Adapter and Voice Service Bridge OBi202 – VoIP Phone Adapter with Router, 2-Phone Ports, T.38 Fax OBi302 – VoIP Phone Adapter with Router, 2-Phone Ports, T.38 Fax (SIP Only)

  • Page 2: Copyright 2010-2012 Obihai Technology, Inc

    ISUAL AND ASED 99 OB PEED IALING OF NDPOINTS OR UMBERS PHONE 1/2 COLLABORATIVE FEATURES (OBI202 ONLY) STAR CODE FEATURES CALL FORWARD NUMBERS CONFIGURATION AND MANAGEMENT INTERFACES OF THE OBI DEVICE -IVR-B ELEPHONE ASED OCAL ONFIGURATION Copyright 2010-2012 Obihai Technology, Inc.

  • Page 3: Table Of Contents

    ESTORE ESET ONFIGURATION TO ACTORY EFAULT OUCH ASSIVE CALE EMOTE ROVISIONING ITSP QUICK START SETUP WIZARD (OBI100 AND OBI110) ITSP QUICK START SETUP WIZARD (OBI202) STATUS WEB PAGES YSTEM TATUS LAN S TATUS ONLY TATUS ISTORY SERVICES, PHONE & LINE STATUS...
  • Page 4 RING PROFILE A & B FEATURES OF THE OBI DEVICE STAR CODE PROFILE FEATURES OF THE OBI DEVICE (VAR) CRIPT ARIABLES (ACT) CRIPT CTIONS CRIPT ORMAT CRIPT XAMPLES USER SETTINGS FEATURES OF THE OBI DEVICE Copyright 2010-2012 Obihai Technology, Inc.
  • Page 5 OUTBOUND CALL ROUTE CONFIGURATION DIGIT MAP CONFIGURATION IGIT ULES AND LEMENTS ATCHING GAINST ULTIPLE ULES IN IGIT NVOKE ECOND ONE IN IGIT EFINED IGIT EFINED IGIT IALING SPECIFICATIONS & ENVIRONMENTAL CHARACTERISTICS OF THE OBI DEVICE Copyright 2010-2012 Obihai Technology, Inc.

  • Page 6: Introduction

    ITSP Profile A - SIP::ProxyServer = sip.myserviceprovider.com The OBi110 LINE Port The LINE port is available only on the OBi110 model. As such references in this document that describe configuration or behavior of the LINE port or “Li” interface apply only to the OBi110.

  • Page 7: Introduction To Obi Devices

    OBiON for iPhone, iPad, iPod touch & Android Devices: An application for iPhone, iPad, iPod touch and Android devices which makes possible placing and receiving calls to/from other OBi endpoints. OBiAPP for PC: An application for a PC that facilitates placing and receiving calls to/from other OBi endpoints. Copyright 2010-2012 Obihai Technology, Inc.
  • Page 8 - Google Voice Support Not Available on the OBi302  SIP Service Provider Support for Up to Four (4) SIP Accounts – 2 on the OBi100 and OBi110, 4 on the OBi202  Any Available Service Can be Accessed from Each Phone Port Independently ...

  • Page 9: Physical Interfaces Of The Obi Device

    Overview of the OBi Device Physical Interfaces Top Views of the OBi100, OBi110 and OBi202/OBi302 LED Order (Left to Right): Power Status – Internet Port Activity – LAN Port Activity (OBi202) – PHONE Status – LINE Status (OBi110) Rear Views of the OBi100, OBi110 and OBi202/OBi302 Port Order (L-to-R): LINE Port (OBi110) –...

  • Page 10: Led D Escription And Led B Ehaviour

    PSTN LINE, indicates OBiTALK service is available. Solid Green If the Primary Line is SP1/SP2/OBiTALK, indicates the corresponding primary service is available. Flashing Green The phone is in use. Fast Flashing Green The phone is ringing. Copyright 2010-2012 Obihai Technology, Inc.
  • Page 11 Fast Flashing Green The line is ringing. LED Pattern When Hardware Reset Button Is Pressed for Ten (10) Seconds: Power LED blinks green slowly for 5 seconds and fast for 4 seconds prec Supprteding unit reboot. Copyright 2010-2012 Obihai Technology, Inc.
  • Page 12 PHONE port option UseForPagingOnly. In this configuration, the phone port is expected to be “off-hook” all the time. The OBi will automatically answer incoming calls. It will not accept call-waiting. Copyright 2010-2012 Obihai Technology, Inc.
  • Page 13 Attendant can be customized if necessary by modifying Auto Attendant::DigitMap and Auto Attendant::OutboundCallRoute. Note: Occurrences of (Mpli) and pli are substituted internally with the corresponding abbreviated trunk name of the selected primary line. LINE Port is available on the OBi110 only Copyright 2010-2012 Obihai Technology, Inc.

  • Page 14: Features Available On The Obi202 Model

    For anonymous level access: http://<OBi-IP-Address>/obi_share/anonymous  For admin or user level access: http://<OBi-IP-Address>/obi_share The File Explore can be launched from either the WAN or LAN side of the OBi. The WAN side access can be disabled in the configuration. Copyright 2010-2012 Obihai Technology, Inc.
  • Page 15 IP addresses for some devices with specific MAC addresses. With this, those devices can always be assigned the same IP addresses reserved for them each time they make a request to the DHCP server. See the LAN Settings and DHCP Reservation sections for more details. Copyright 2010-2012 Obihai Technology, Inc.
  • Page 16 Note that the total guaranteed bandwidth allocated to all the four priority classes is equal to the total available uplink bandwidth, which must be specified correctly in the UpStreamBandwidth parameter in the QoS settings for QoS to work properly. Copyright 2010-2012 Obihai Technology, Inc.
  • Page 17 When VLAN is enabled, packets sent to the OBi not belonging to the same VLAN are dropped, while packets sent by the OBi are tagged with the configured VLAN ID. The packets switched directly between the external ports, on the other hand, are not modified by the OBi. Copyright 2010-2012 Obihai Technology, Inc.

  • Page 18: End User Features Available On The Obi

    OBi, dial *60. You will be prompted to enter the number to which the calls will be forwarded. Dial the number plus the # key and a confirmation tone will be heard. To disable Call Forward on Busy, dial *61. A confirmation tone will be heard Copyright 2010-2012 Obihai Technology, Inc.

  • Page 19: Way Calling

    You can continue to talk together, as this is now a 3-way call, or you can hang up the phone and the other two parties will remain connected. Copyright 2010-2012 Obihai Technology, Inc.

  • Page 20: C Aller Id B Lock (A Nonymous C Alling )

    / account. If no voicemail account is set-up, the OBi will return a busy signal to the caller until you turn off DND. To turn on DND, from a phone attached to the OBi, dial *78. To turn off DND, from a phone attached to your OBi, dial *79. Copyright 2010-2012 Obihai Technology, Inc.

  • Page 21: Speed Dialing Of 99 Obi Endpoints Or Numbers

    The OBi device supports service features via the handset connected to the PHONE port. The following Star Codes can be used to access the indicated features. OBi Star Code Enabled Features Apply to All Voice Services. Copyright 2010-2012 Obihai Technology, Inc.
  • Page 22 ∞ Note: Be careful with the Speed Dial Set-Up as this will conflict with the Speed Dials set-up on the OBiTALK portal. The Speed Dials that are set-up on the OBiTALK portal will always overwrite anything set-up via the phone connected to the OBi. Copyright 2010-2012 Obihai Technology, Inc.
  • Page 23 Copyright 2010-2012 Obihai Technology, Inc.

  • Page 24: Call Forward Numbers

    PSTN service (on the LINE Port), or PP1 for the OBiTALK Service. The number to forward to must be in the final form that is acceptable by the service provider. OBi will not apply any Digit Map or Call Routing Rules on it. Examples: SP1(14089991234), PP1(ob200333456) Copyright 2010-2012 Obihai Technology, Inc.

  • Page 25: Configuration And Management Interfaces Of The Obi Device

    Your current IVR password value will Press 2 to set the default value. be read back to you and you will be Press 0 to repeat the information. given the option to change the value. Copyright 2010-2012 Obihai Technology, Inc.

  • Page 26: System Level Configuration Options

    Firmware Version Press 0 to repeat the information. The current value of the firmware Press # to enter another configuration version will be read back. selection. IVR Password Press 1 to enter a new value. Copyright 2010-2012 Obihai Technology, Inc.

  • Page 27: Network Related Configuration Options

    (Always Press “#” After Entering Selection) Press 1 to enter a new value. DHCP Configuration Press 2 to set the default value. The current value of the DHCP configuration will be read back. Press 0 to repeat the information. Copyright 2010-2012 Obihai Technology, Inc.

  • Page 28: Router Related Configuration Options (Ob I 202 Only )

    Note: Always Press “#” After Entering Selection Enable Web Management Access from Press 1 to enter a new value. WAN port Press 2 to set the default value. The current value will be read back. Copyright 2010-2012 Obihai Technology, Inc.

  • Page 29: Obiwifi Network Related Configuration Options (Obi202 And Obi302 Only)

    Press 1 to enter a new value. DHCP Configuration Press 2 to set the default value. The current value of the DHCP Press 0 to repeat the information. configuration will be read back. Press # to enter another configuration selection. Copyright 2010-2012 Obihai Technology, Inc.

  • Page 30: Sip Service Provider Configuration Options

    (Always Press “#” After Entering Selection) Press 1 to enter a new value. Enable Service Provider One (SP1) Press 2 to set the default value. The current value will be read back. Press 0 to repeat the information. Copyright 2010-2012 Obihai Technology, Inc.
  • Page 31 Press 1 to enter a new value. Press 2 to set the default value. SP1 Call Forward on Busy – Enable / Press 0 to repeat the information. Disable Press # to enter another configuration selection. Copyright 2010-2012 Obihai Technology, Inc.
  • Page 32 SP2 User ID Press 0 to repeat the information. The current value will be read back. Press # to enter another configuration selection. SP2 Block Caller ID Enable Press 1 to enter a new value. Copyright 2010-2012 Obihai Technology, Inc.
  • Page 33 SP2 Call Forward on No Answer – Press 0 to repeat the information. Enable / Disable Press # to enter another configuration selection. Press 1 to enter a new value. SP2 Call Forward on No Answer Copyright 2010-2012 Obihai Technology, Inc.
  • Page 34 Number Press 2 to set the default value. Press 0 to repeat the information. Press # to enter another configuration selection. Copyright 2010-2012 Obihai Technology, Inc.

  • Page 35: Obitalk Configuration Options

    Press 0 to repeat the information. Press # to enter another configuration selection. Press 1 to enter a new value. OBiTALK Call Forward on Busy – Enable / Disable Press 2 to set the default value. Copyright 2010-2012 Obihai Technology, Inc.

  • Page 36: Auto Attendant Configuration Options

    (Always Press “#” After Entering Selection) Press 1 to enter a new value. Press 2 to set the default value. Enable / Disable Auto Attendant. Press 0 to repeat the information. Press # to enter another configuration selection. Copyright 2010-2012 Obihai Technology, Inc.

  • Page 37: Line (Fxo) Port Configuration Options

    Press 1 to enter a new value. Press 2 to set the default value. Ring Thru Delay Press 0 to repeat the information. The current value will be read back. Press # to enter another configuration selection. Copyright 2010-2012 Obihai Technology, Inc.

  • Page 38: Customized Aa Prompt Recording Options

    Furthermore you can enter a text description for each recorded prompt as a reminder of the contents of the prompt (under the Voice Services - Auto Attendant configuration page). Copyright 2010-2012 Obihai Technology, Inc.

  • Page 39: Web Server-Based Local Configuration

    In fact, the WAN side access to the web server is disabled by default. You can enable this option on the device web page (from the LAN side), or by using the device configuration IVR (* * * 0 option 30) from an attached telephone. Copyright 2010-2012 Obihai Technology, Inc.

  • Page 40: Web Page Conventions And Icons & Buttons

    Required” icon appears indicating the OBi device Configuration Reset, the requires a reboot to invoke one or more Reboot button does not parameter modifications. need to be pressed. The OBi will reboot automatically when the “Reset” button is selected. Copyright 2010-2012 Obihai Technology, Inc.

  • Page 41: Firmware: Local Obi Device Update And Management

    If the new firmware is upgraded successfully, the OBi device will reboot automatically to start running the new firmware. Otherwise the page will show an error message explaining why upgrade has failed. Copyright 2010-2012 Obihai Technology, Inc.

  • Page 42: Possible Error Messages On Firmware Update Failure

    When restoring the configuration to a previous backup copy, you will need to specify the backup file you want to restore to by selecting the “Browse” button in the Restore Configuration section of the web page. Then, select the “Restore” button to start the process. The OBi device will automatically reboot, after the restoration is complete. Copyright 2010-2012 Obihai Technology, Inc.

  • Page 43: Reset Configuration To Factory Default

    Please contact sales@obihai.com for information regarding the capability, process and practice of using OBi ZT Provisioning. Copyright 2010-2012 Obihai Technology, Inc.

  • Page 44: Itsp Quick Start Setup Wizard (Obi100 And Obi110)

    Setup Wizard page will show the same values. The illustration below depicts the OBi device web page Setup Wizard. ITSP Quick Start Setup Parameter Guide (OBi100 and OBi110): Parameter Description...
  • Page 45 Attendant PrimaryLine when dialing out via the AA. Mirrors PSTN Line Auto Attendant::PrimaryLine Digit map controlling the transmission of dialed digit information. Mirrors Service Providers – ITSP DigitMap (1xxxxxxxxxx|<1>[2-9]xxxxxxxxx |011xx.|xx.) ITSP Profile A – General::DigitMap Copyright 2010-2012 Obihai Technology, Inc.
  • Page 46 Mirrors ITSP InboundCallRoute Voice Services – SP1 Service::X_InboundCallRoute Routing rule for inbound calls on this OBiTALK trunk. Mirrors InboundCallRoute OBiTALK Service::InboundCallRoute Routing rule for inbound calls on this POTS-line trunk. Mirrors InboundCallRoute LINE Port::InboundCallRoute Copyright 2010-2012 Obihai Technology, Inc.

  • Page 47: Itsp Quick Start Setup Wizard (Obi202)

    The Setup Wizard page for OBi202 and OBi302 is very similar to that of the OBi1xx, with a few additions to cover the additional ISTP profiles and SP services. The illustration below depicts the OBi202 device web page Setup Wizard. Copyright 2010-2012 Obihai Technology, Inc.
  • Page 48 Host name or IP address of the SIP proxy server. Mirrors ITSP X SIPProxyServer Service Providers – ITSP Profile X – SIP::ProxyServer Destination port to connect to the SIP server. ITSP X Mirrors 5060 SIPProxyServerPort Service Providers – ITSP Profile X – Copyright 2010-2012 Obihai Technology, Inc.
  • Page 49 SIP Requests (such as REGISTER and INVITE); otherwise device SPn URI forms its AOR in the normal way. See description of Voice Services – SPn Service::URI for details on how to use this parameter. Mirrors Copyright 2010-2012 Obihai Technology, Inc.
  • Page 50 Voice Services – SPn Service::URI Routing rule for inbound calls on this trunk. Mirrors SPn InboundCallRoute ph,ph2 Voice Services – SPn Service::X_InboundCallRoute Routing rule for inbound calls on this trunk. OBiTALK Mirrors ph,ph2 InboundCallRoute OBiTALK Service::InboundCallRoute Copyright 2010-2012 Obihai Technology, Inc.

  • Page 51: Status Web Pages

    The following series of illustrations are taken from screen shots of the System Status page of an OBi202. The System Status page is divided into several sections: WAN Status, WiFi Status, Product Information, OBiBlueTooth Service Status, SP1 – SP4 Service Status, OBiTALK Service Status, and OBiPLUS Service Status. Copyright 2010-2012 Obihai Technology, Inc.
  • Page 52 Copyright 2010-2012 Obihai Technology, Inc.
  • Page 53 Incoming Call: BT detected an incoming call, but ringing has not started yet Ring <Caller-ID>: Mobile phone is ringing. <Caller-ID> is the caller’s number Outgoing Call: Mobile phone is making a call that is not answered yet Copyright 2010-2012 Obihai Technology, Inc.

  • Page 54: Lan Status (Obi202 Only)

    MAC address, an IP address, and the lease expiration time (in seconds) Below is a screen shot of a typical LAN Status page. This page is available when the OBi202 is working in router mode. Copyright 2010-2012 Obihai Technology, Inc.
  • Page 55 Copyright 2010-2012 Obihai Technology, Inc.

  • Page 56: Call Status

    Remove: This button is available for all calls. Pressing this button will end that call. Record: This button is available for calls involving the Phone port only. Pressing this button allows you to record the current conversation in an audio (.au) file Copyright 2010-2012 Obihai Technology, Inc.

  • Page 57: Call History

    The Call History page also captures what time various events took place. The Call History can be saved at any time by clicking on the “Save All” button. The Call History can be saved as an XML formatted file called “callhistory.xml”. Copyright 2010-2012 Obihai Technology, Inc.

  • Page 58: Services, Phone & Line Status

    Services, Phone & Line Status Statistics relevant to SPn can be found on the SPn Stats page (where n = 1, 2, 3, 4). Copyright 2010-2012 Obihai Technology, Inc.
  • Page 59 RTP payload bytes received for this line PacketsLost Number of RTP packets lost on this line Overruns Number of times receive jitter buffer overrun on this line Underruns Number of times receive jitter buffer underrun on this line Copyright 2010-2012 Obihai Technology, Inc.
  • Page 60 Port status, such as on-hook, off-hook, ringing LoopCurrent Loop current in mA VBAT PHONE port battery voltage in volts. Not applicable for LINE port TipRingVoltage Sensed differential Tip/Ring voltage in volts LastCallerInfo Caller ID of previous call Copyright 2010-2012 Obihai Technology, Inc.

  • Page 61: Router Configuration (Obi202 Only)

    Router Configuration (OBi202, OBi302 Only) WAN Settings Below is a screen shot of the WAN Settings device web page. Copyright 2010-2012 Obihai Technology, Inc.
  • Page 62 PPPoE: IP address default gateway, etc. are acquired by PPPoE Protocol (OBi202, OBi302 only) IPAddress The IP address to assign to the device when AddressingType is set to Static SubnetMask The subnet mask to use when AddressingType is set to Static Copyright 2010-2012 Obihai Technology, Inc.
  • Page 63 Local time zone. Available choices are: GMT-08:00 GMT-12:00(Int'l Dateline West) GMT-11:00(Samoa) GMT-10:00(Hawaii) GMT-09:00(Alaska) GMT-08:00(Pacific Time) GMT-07:00(Mountain Time) GMT-06:00(Central Time) GMT-05:00(Eastern Time) GMT-04:00(Atlantic Time) GMT-03:30(Newfoundland) GMT-03:00(Buenos Aires,Greenland) GMT-02:00(Mid-Atlantic) GMT-01:00 GMT+00:00(London,Lisbon) GMT+01:00(Rome,Paris,Madrid) GMT+02:00(Athens,Cairo) GMT+03:00(Moscow,Baghdad) GMT+04:00(Abu Dhabi) GMT+04:30(Kabul) GMT+05:00(Islamabad,Karachi) GMT+05:30(New Delhi) GMT+05:45(Kathmandu) GMT+06:00 Copyright 2010-2012 Obihai Technology, Inc.
  • Page 64 (5060 for SIP, 80 for HTTP, etc.) . The enclosing curly braces { } are also optional if there is only one R; or if there is no comma used inside the R. Examples: _sip._udp+obihai.com=abc,xyz,pqr:5080,{mmm,2},{super.abc.com.} abc.obihai.com=192.168.15.118,192.168.15.108 Copyright 2010-2012 Obihai Technology, Inc.

  • Page 65: Lan Settings

    DNS Records, the device will attempt to resolve it using external DNS queries. Any change applied to local DNS Record needs reboot in order to take effect. LAN Settings Below is a screen shot of the LAN Settings device web page. Copyright 2010-2012 Obihai Technology, Inc.
  • Page 66 SubnetMask, a red exclamation mark (!) will be shown next to the value on the OBi device web page. AddressLeaseTime IP address lease time in minutes 1440 LocalDomainName Local Domain Name for the LAN Copyright 2010-2012 Obihai Technology, Inc.

  • Page 67: Dhcp Reservation

    An optional name for easy identification of the client Client MAC address in the format "xx:xx:xx:xx:xx:xx" (where each x is a hex ClientMACAddress digit that can be in the upper or lower case) ReservedIPAddress The IP address to reserve for this client Copyright 2010-2012 Obihai Technology, Inc.

  • Page 68: Firewall And Dmz

    VPNPassThrough otherwise all VPN traffic are blocked. This setting takes effect only if firewall is enabled; otherwise this feature is enabled DMZ Settings Enable Enable DMZ Service HostIPAddress The IP address of the DMZ server Copyright 2010-2012 Obihai Technology, Inc.

  • Page 69: Port Forwarding

    Ending port number of the forwarded port range. If it is the same as EndingPort StartingPort, only the one port equal to the StartingPort will be forwarded ServerIPAddress The LAN side IP address to forward the packet to when it is received at a port Copyright 2010-2012 Obihai Technology, Inc.

  • Page 70: Qos Settings

    Differentiated Service Code Point (DSCP) in their IP headers. The 64 possible DSCP codes (0 – 63) can be mapped into one of the four priority classes using the configurable DSCP to Priority Class Mapping table. Below is a screen shot of the QoS Settings web page. Copyright 2010-2012 Obihai Technology, Inc.
  • Page 71 Copyright 2010-2012 Obihai Technology, Inc.
  • Page 72 The guaranteed uplink bandwidth allocation weight for High High Priority class traffic. It must be a value between 1 and 10 The guaranteed uplink bandwidth allocation weight for Medium Medium Priority class traffic. It must be a value between 1 and 10 Copyright 2010-2012 Obihai Technology, Inc.

  • Page 73: Obiwifi

    WAN (Ethernet) interface and OBiWiFi are on different subnet and b) the destination address is on the same subnet as OBiWiFi. If the OBi is set to function as a LAN switch rather than a router, OBiWiFi is disabled internally. Copyright 2010-2012 Obihai Technology, Inc.

  • Page 74: Wifi Settings

    WiFi Settings A screenshot of the WiFi Settings device page is shown below. Copyright 2010-2012 Obihai Technology, Inc.
  • Page 75 10 HEX digits, 26 HEX digits, 5 ASCII characters, or 13 ASCII characters. The HEX digits can be upper or lower case SecurityEnabled This is a read only parameter. It indicates if the AP has security enabled or not Copyright 2010-2012 Obihai Technology, Inc.

  • Page 76: Wifi Scan

    “Add a Network” link. The “Manage Networks” link takes you back to the WiFi Settings device page, whereas the “Scan For Networks” link reloads this page in order to rescan for the access points in the neighbourhood. Copyright 2010-2012 Obihai Technology, Inc.

  • Page 77: System Management Features Of The Obi Device

    System Management Features of the OBi Device Network Settings This section applies to OBi100 and OBi110 only. For OBi202, please refer to the section WAN Settings. Network Settings Parameter Guide: Default Parameter Description Setting Internet Settings The method used for assigning IP address, subnet mask, default gateway, etc., to the device.
  • Page 78 GMT+05:00(Islamabad,Karachi) GMT+05:30(New Delhi) GMT+05:45(Kathmandu) GMT+06:00 GMT+07:00(Bangkok,Jakarta) GMT+08:00(Beijing,HK,Singapore) GMT+09:00(Tokyo,Seoul) GMT+10:00(Sydney,Guam) GMT+11:00(Solomon Is.) GMT+12:00(Fiji,Auckland) DaylightSavingTimeEnable Enable daylight saving time on the unit DaylightSavingTimeStart Daylight Saving Time Start Date. Format: month/day/weekday/hh:mm::ss, 3/8/7/2 where month=1-12, day=±(1-31), weekday=0,1-7 (0=special, 1=Monday, Copyright 2010-2012 Obihai Technology, Inc.
  • Page 79 Note: If the A record of a given hostname cannot be found in any of the Local DNS Records, the device will attempt to resolve it using external DNS queries. Any change applied to local DNS Record needs reboot in order to take effect. Copyright 2010-2012 Obihai Technology, Inc.

  • Page 80: Automatic Firmware Update & Provisioning

    Automatic Firmware Update & Provisioning Auto Provisioning Parameter Guide: Parameter Description Default Setting Auto Firmware Update Current operational method of auto firmware updating. Method Available choices are: Disabled Disabled = Do not check for f/w upgrade from Copyright 2010-2012 Obihai Technology, Inc.
  • Page 81 (i.e., equivalent to setting Method to System Start) ConfigURL URL of config file tftp://$DHCPOPT66/$MAC.xml Non-volatile generic parameters which can be referenced in GPRM0 to GPRM7 other parameters, such as ConfigURL Copyright 2010-2012 Obihai Technology, Inc.
  • Page 82 This is read only status value regarding the syntax of the UDM. “Pass” means that this UDM is valid. Otherwise, it SyntaxCheckResult shows the syntax error detected by the device either in the Value or ExpandIn parameters of the UDM. Copyright 2010-2012 Obihai Technology, Inc.
  • Page 83 Firmware version, such as 1.0.3.1626 Hardware version, such as 2.8 Device current IP Address, such as 192.168.15.100 Device Model Name, such as OBi110 Device Model Number, such as 110 Device OBi Number, such as 200123456 Device S/N, such as 88B01NA00000 GPRMn n=0–...

  • Page 84: Device Administration

    If the value is blank, syslog is disabled Port Syslog Server Port Number Level Syslog Message Level HTTP Client UserAgent Value of the User-Agent header in all HTTP Requests which are used in firmware upgrade and auto provisioning. Copyright 2010-2012 Obihai Technology, Inc.

  • Page 85: Device Update

    SPn Service::AuthUsername = Not Blank where X = A or B, n = 1, 2, 3, or 4. Otherwise the service is considered disabled. ITSP Profile C and D are available on the OBi202 only Copyright 2010-2012 Obihai Technology, Inc.

  • Page 86: Sip Registration

    When sending out SIP requests to the server, the device looks up the IP address of the server using standard DNS query if the server is specified as a domain name instead of an IP address. If Outbound Proxy Server is configured, it is used instead Copyright 2010-2012 Obihai Technology, Inc.

  • Page 87: Nat Traversal Considerations

    Subsequently, the device maintains registration with the primary server the usual way. However, if no working server is found after traversing the entire list, device takes a short break and repeats the search in the same order. Copyright 2010-2012 Obihai Technology, Inc.

  • Page 88: Sip Privacy

    RPID, and also sets the display name in the FROM and RPID headers to “Anonymous” for backward compatibility. The device will not insert PAID in outbound INVITE requests. Copyright 2010-2012 Obihai Technology, Inc.

  • Page 89: Stun And Ice

    When the device receives this, it will look for a ring tone name or call-waiting tone name in the ring profile that matches the Alert-Info URI. Ring tone names are compared case- insensitively. If a match is found, device plays the corresponding ring or call-waiting tone. Otherwise, device plays the default ring. Copyright 2010-2012 Obihai Technology, Inc.

  • Page 90: Rtp Statistics - The X-Rtp-Stat Header

    *04 – Make a RTP Packet Loopback Call. Note that outbound Media Loopback Call is not subjected to call duration limit; it will last until the user hangs up or until the called device ends the call. Copyright 2010-2012 Obihai Technology, Inc.
  • Page 91 Website of this service provider. Maximum Length = 127 characters Phone number to contact this service provider. ContactPhoneNumber Maximum Length = 31 characters Email address to contact this service provider. EmailAddress Maximum Length = 127 characters. Copyright 2010-2012 Obihai Technology, Inc.
  • Page 92 Copyright 2010-2012 Obihai Technology, Inc.
  • Page 93 Allow outbound Caller ID spoofing. If set to Yes, device will attempt to set the caller-id name and userid field in the FROM header to that of a remote caller in the case of a Copyright 2010-2012 Obihai Technology, Inc.
  • Page 94 FROM header as well as the Request-URI Otherwise, if the URI does not contain ‘@’, it is user as the userid field in TO/FROM header as well as the Request-URI, which are otherwise same as REGISTER Copyright 2010-2012 Obihai Technology, Inc.
  • Page 95 VIA header our outbound SIP messages. This option should be turned off if you are using port forwarding on the external router to route inbound SIP messages to the OBi This feature is available on the OBi202, OBi302 only Copyright 2010-2012 Obihai Technology, Inc.
  • Page 96 0. DSCPMark ∞ Diffserv code for outgoing RTP packets with this SP X_UseSSL Enable this option to force OBi to send RTP over a SSL channel when the ITSP is Google Voice Copyright 2010-2012 Obihai Technology, Inc.

  • Page 97: Google Voice™ Service

    Accept the setting of the parameter ITSP Profile A/B – General::DTMFMethod. The value can be either InBand or RFC2833. Other values will be reverted to RFC2933. Default is RFC2833. Voice Service Features of the OBi Device. Copyright 2010-2012 Obihai Technology, Inc.
  • Page 98 SP1, SP2, SP3, and SP4 Services Copyright 2010-2012 Obihai Technology, Inc.
  • Page 99 PHONE port. The ringing pattern will be taken from the given profile. Choices are A, or B X_CodecProfile Select a Codec Profile for all calls on this service. Choices are A, or B Copyright 2010-2012 Obihai Technology, Inc.
  • Page 100 OBiPLUS solution. X_SIPDebugOption Enable sending of SIP signaling debug information to the syslog Disable server (if one is configured on the device). Available choices are: Disable (do not send SIP signaling debug information) Copyright 2010-2012 Obihai Technology, Inc.
  • Page 101 The following attributes are supported: mac: Required. The MAC address of the IP Phone in 12-hex- digit format, such as “008e3c123456” model: Required. The make/model of the phone, such as "Cisco/SPA504G" Copyright 2010-2012 Obihai Technology, Inc.
  • Page 102 Optional. If present, it must be somewhere between two bn attributes. A string label to display on the phone screen next to the current function key. For example “$USER”, Copyright 2010-2012 Obihai Technology, Inc.
  • Page 103 2) Change UserAgentDomain to users.myitsp.com, then AOR = 4089991123@users.myitsp.com 3) Change URI to bobdylan, then AOR = bobdylan@users.myitsp.com 4) Change URI to bobdylan@superusers.myitsp.com, then AOR = bobdylan@superusers.myitsp.com Note: In all cases, device uses AuthUserName and Copyright 2010-2012 Obihai Technology, Inc.
  • Page 104 Note: It is possible for a user to set this parameter from the phone using a Star Code CallForwardOnNoAnswerRingCount Number of rings to be considered by the device as no answer to an incoming call. Copyright 2010-2012 Obihai Technology, Inc.
  • Page 105 Use SRTP Only = Require all calls to use SRTP; the call will fail if the peer does not support SRTP Use SRTP When Possible = Use SRTP for a call if the peer supports SRTP; otherwise fallback to use regular unencrypted SRTP Copyright 2010-2012 Obihai Technology, Inc.

  • Page 106: Sp N A S Proxy For Asip Ip Phone

    For example, SP1 has a local_client with the user-id 4086578118. The client wishes to make and receive calls on SP3 which has been set up with Google Voice. The SP1 InboundCallRoute shall include the following rule: {4086578118>:sp3} The SP3 InboundCallRoute shall be: {sp1(408657118@local_client)} Copyright 2010-2012 Obihai Technology, Inc.

  • Page 107: Obitalk Service Settings

    Select a Codec Profile to be used for all calls on this service. Choices are A, or B. DefaultRing Default ring pattern number to ring the PHONE port for incoming calls on this trunk that are routed to the Copyright 2010-2012 Obihai Technology, Inc.
  • Page 108 If the call is routed to the PHONE port where the phone is in a busy state (such as ringing, dialing, playing reorder, or already having 2 calls in progress) Note: It is possible for a user to set this parameter from Copyright 2010-2012 Obihai Technology, Inc.
  • Page 109 Enable Do Not Disturb Service. If enabled, all incoming calls on this service are treated as if the device is busy. Note: It is possible for a user to set this parameter from the phone using a Star Code Copyright 2010-2012 Obihai Technology, Inc.
  • Page 110 Note: If AuthPassword is specified, AuthUserID may be set to blank to let the device use the default value which is a special hash of the AuthPassword. This is only applicable if the external gateway is also an OBi device that understands how to generate the default AuthUserID using the same hash function. Copyright 2010-2012 Obihai Technology, Inc.

  • Page 111: Auto Attendant Service

    AA to callback the current number (typically the case), he can simple enter 00# after selecting option 3 on the AA menu. Note that $1 can only be used as part of a substitution element in the digit map; it must not be used for matching elements since its value is unknown. Copyright 2010-2012 Obihai Technology, Inc.

  • Page 112: User Recorded Prompts

    = play the entire User2 prompt from start to finish %User3%;r=1300-3720 = play User3 prompt starting from 1300ms mark to the 3720ms mark %User4%;r=3200-1200 = does not play anything since <end> is less than <start> Copyright 2010-2012 Obihai Technology, Inc.
  • Page 113 Enter number followed by the # key. Prompts user to enter a valid number after option 2 or option 3 is selected by the user Thank you for choosing Obihai When user presses * or # key to leave the AA Technology. Goodbye.
  • Page 114 Copyright 2010-2012 Obihai Technology, Inc.
  • Page 115 See OBi Call Routing and Digit Map Section for a **9(Mpp)| description of the syntaxes to specify a digit map. (Mpli)) For OBi110: ([1-9]x?*(Mpli)| [1-9]|[1-9][0-9]| <00:$1>|0| **1(Msp1)| **2(Msp2)| **8(Mli)| **9(Mpp)| (Mpli)) For OBi202: ([1-9]x?*(Mpli)| [1-9]|[1-9][0-9]| <00:$1>|0| **1(Msp1)| **2(Msp2)| **3(Msp3)| **4(Msp4)| **9(Mpp)| (Mpli)) Copyright 2010-2012 Obihai Technology, Inc.
  • Page 116 Note that while forking to multiple numbers in an {([1-9]x?*(Mpli)):pp}, AA outbound call routing rule is not supported on {0:ph}, OBi100 and OBi110, it is supported on the OBi202. {(<**1:>(Msp1)):sp1}, {(<**2:>(Msp2)):sp2}, For example, on the OBi202 you may have a rule {(<**8:>(Mli)):li},...
  • Page 117 Menu Prompt List to replace the system’s Menu message PleaseWait Prompt List to replace the system’s PleaseWait message EnterNumber Prompt List to replace the system’s EnterNumber message Prompt List to replace the system’s Bye message Copyright 2010-2012 Obihai Technology, Inc.

  • Page 118: Voice Gateways

    Use only the device’s local address as the SIP Contact, and ignore any natted address discovered by the device. Use the gateway’s SIP URL to form the FROM header of the outbound INVITE. Use the gateway’s AuthUserID and AuthPassword for authentication. Apply the symmetric RTP concept. Copyright 2010-2012 Obihai Technology, Inc.
  • Page 119 SIP URL, such as: SP1(sip.mycompany.com:5060), or SP2(192.168.15.113) DigitMap DigitMap for this VG. It can be referenced as (xx.) (Mvgn) AuthUserID A User-ID to authenticate with the gateway AuthPassword A Password to authenticate with the gateway Copyright 2010-2012 Obihai Technology, Inc.

  • Page 120: Trunk Groups

    (optional) TrunkList A comma separated list of names of trunks For TG1, the default for to include in this trunk group. OBi100 and OBi110 is: sp1,sp2 and for OBi202 is: sp1,sp2,sp3,sp4 For other TG, the default is...

  • Page 121: Obibluetooth Settings

    If the pairing information is removed from the mobile phone after initial pairing and connection with OBiBT, the next time it comes in range with OBiBT, the phone may pop up a message to let you know that the device “OBi” is requesting connection. You may then manually accept the connection. Copyright 2010-2012 Obihai Technology, Inc.

  • Page 122: Obibluetooth Call Features

    OBiBT at a time. In other words, there is no 3-way call or call-waiting support on OBiBlueTooth. The supported call features are similar to the equivalent ones supported under SP or OBiTALK service. The screenshot below shows the Calling Feature parameters on the OBiBluebooth device web page, which should be self- explanatory. Copyright 2010-2012 Obihai Technology, Inc.
  • Page 123 This service already reaches the limit of simultaneous calls as specified in MaxSessions DND (Do Not Disturb) Service is enabled on this service If the call is routed to the PHONE port where the phone Copyright 2010-2012 Obihai Technology, Inc.
  • Page 124 Star Code BridgedOutboundCallMaxDuration Limit on the call duration in seconds for all outbound calls that are bridged from another trunk. A blank or 0 value implies the call duration is not limited. Copyright 2010-2012 Obihai Technology, Inc.

  • Page 125: Phone Interface Features Of The Obi Device

    Repeat Dial service cannot be used on the LINE port. If the last call was made over the LINE port, dialing *05 will result in fast busy. Repeat Dial calls are not logged to call history, except the last and successful one when the called party rings or answers. Copyright 2010-2012 Obihai Technology, Inc.
  • Page 126 Copyright 2010-2012 Obihai Technology, Inc.
  • Page 127 {(<**9:>(Mpp)):pp}, See OBi Call Routing and Digit Map Section for a {(Mpli):pli} description of the syntaxes to specify this parameter For OBi110: {([1-9]x?*(Mpli)):pp}, {(<#:>|911):li}, {**0:aa},{***:aa2}, Copyright 2010-2012 Obihai Technology, Inc.
  • Page 128 This For OBi110: parameter indicates to the device which voice service is PSTN Line considered as the primary line when dialing out from the PHONE port. Available choices are: Copyright 2010-2012 Obihai Technology, Inc.
  • Page 129 Maximum supported current (15 mA to 45 mA) when the attached phone is off-hook Impedance PHONE port impedance setting. Available choices are (units in ohm if not specified): 270+(750||150 nF) 220+(820||120 nF) 370+(620||310 nF) 320+(1050||230 nF) 350+(1000||210 nF) 200+(680||100 nF) 600+2.16 uF 900+2.16 uF Copyright 2010-2012 Obihai Technology, Inc.
  • Page 130 - Hold current call and start second dial tone for 3-way calls - Start a 3-way conference - End call with 2 conferencee in a 3-way conference - Swap between two calls in a call-waiting situation Copyright 2010-2012 Obihai Technology, Inc.
  • Page 131 With this enabled, you can still let the device handle normal hook flash event locally and preserve the call-waiting and 3-way calling functionalities. This option is only available in OBi110 CallerIDEnable Enable Caller ID Signal generation. This option can be set to Yes even if the attached phone is not capable of displaying Caller ID.
  • Page 132 MediaLoopbackMaxDuration Maximum duration in seconds to allow for an inbound media loopback call. Set the value to blank or 0 to make it unlimited RepeatDialInterval Interval in seconds between redial in a repeat dial Copyright 2010-2012 Obihai Technology, Inc.
  • Page 133 EnableLINEPortBargeIn This option is useful only when a PSTN line is connected to the OBi110. By default a user can pick up the phone and dial # to connect to the LINE port. If no one else using the PSTN line at that time, the user will hear dial tone from the phone company.
  • Page 134 Minimum time apart between two successive hook flash events to be recognizable by the device as a double hook flash event. The unit is in millisconds. This option is only available in OBi110 DoubleHookFlashTimeMax Maximum time apart between two successive hook flash events to be recognizable by the device as a double hook flash event.

  • Page 135: Telephone Line Interface Features Of The Obi Device

    = The PSTN line is being used by an external handset parallel to the LINE port ringing = The line is ringing offhook = The LINE port is currently off hook pwr down = The PSTN line is disconnected from the LINE port Copyright 2010-2012 Obihai Technology, Inc.
  • Page 136 None: Do not detect call connected state. Device will simply assume the call is connected once it finishes dialing Detect speech: Device will detect speech signal on the line as a positive indication of call connected state. Copyright 2010-2012 Obihai Technology, Inc.
  • Page 137 (such as ringing, dialing, playing reorder tone, or already having 2 calls in progress) Note: It is possible for a user to set this parameter from the phone using a Star Code Copyright 2010-2012 Obihai Technology, Inc.
  • Page 138 Star Code Limit on the call duration in seconds for all outbound calls that are bridged from another BridgedOutboundCallMaxDuration trunk. A blank or 0 value implies the call duration is not limited. Copyright 2010-2012 Obihai Technology, Inc.
  • Page 139 PSTN line silence detection servers the purpose of determining if the PSTN peer has ended the call when silence is detected for a prolonged period (while CPC, Disconnect Tone, and Polarity Reversal signals are not available). Copyright 2010-2012 Obihai Technology, Inc.
  • Page 140 Time in ms between ring signal validated and valid ring signal indicated RingTimeout Time (ms) elapsed since last ring threshold crossing to declare ring is over 1408 RingerImpedance Synthesized ringer impedance to meet specification in countries, such as High Poland, South Africa, and Slovenia Copyright 2010-2012 Obihai Technology, Inc.

  • Page 141: Codec Profile Features Of The Obi Device

    The codecs available on the OBi100/OBi110 and on the OBi202 are slightly different. Below screen shots show the Codec Profile web page for each device model.
  • Page 142 Copyright 2010-2012 Obihai Technology, Inc.
  • Page 143 Copyright 2010-2012 Obihai Technology, Inc.
  • Page 144 Copyright 2010-2012 Obihai Technology, Inc.
  • Page 145 Note: Informational only; not configurable G711A Codec Codec Codec Name G711A BitRate Bit rate in bits/sec 64000 Note: Informational only; not configurable Enable Enable this codec SilenceSuppression Enable silence suppression for this codec PacketizationPeriod Packet size in ms Copyright 2010-2012 Obihai Technology, Inc.
  • Page 146 PacketizationPeriod Packet size in ms Priority Priority assigned to this codec (1 is the highest) G726R16, G726R24, and G726R40 codecs are only available only on the OBi100/110; iLBC codec is only available on the OBi202 Copyright 2010-2012 Obihai Technology, Inc.
  • Page 147 PayloadType Dynamic Payload type for this codec. Valid range is 96-127 Codec Settings G726BitPacking Two values to choose from: big-endian or little-endian big-endian T38Enable Enable the use of T38 (FAX Relay) Copyright 2010-2012 Obihai Technology, Inc.

  • Page 148: Tone & Ring Patterns

    Field - 3/4/5/6 share the same definition, and each field describes one single cadence segment. Together 4 fields form a macro-segment, which will be repeated until tone playback expires. The expression is a string of numeric values with the special notation '/', '(', ')' and ','. It has a complete format as below: Copyright 2010-2012 Obihai Technology, Inc.
  • Page 149 The above example illustrates using the first frequency to generate tone for 0.3 seconds, followed by 2.34 seconds of silence, then use a combination of the first and second frequencies to generate tone for 2 seconds, then followed by 1.5 seconds silence. The cadence operates repeatedly for 4 seconds. Copyright 2010-2012 Obihai Technology, Inc.

  • Page 150: Tone Examples

    The 2nd on-off section: generated by the 2nd frequency component, and it has 0.38 tone second active time and 0 inactive time.  The 3rd on-off section: generated by the 3rd frequency component, and it has 0.38 tone second active time and 0 inactive time. Copyright 2010-2012 Obihai Technology, Inc.
  • Page 151 Tone Profile A & B Parameter Guide: Parameter Description Default Setting Dial Tone ToneName Dial Tone TonePattern Obihai Tone Pattern Script 350-18,440-18;20 Ringback Tone ToneName Ringback Tone TonePattern Obihai Tone Pattern Script 440-18,480-18;-1;(2+4) Busy Tone ToneName Busy Tone Copyright 2010-2012 Obihai Technology, Inc.
  • Page 152 Howling Tone for off-hook warning TonePattern Obihai Tone Pattern Script 480+3,620+3;10;(.125+.125) Prompt Tone ToneName Prompt Tone to prompt user to enter a number for configuration, such as speed dial TonePattern Obihai Tone Pattern Script 480-16;20 Copyright 2010-2012 Obihai Technology, Inc.
  • Page 153 Obihai Tone Pattern Script 350-16;10;(.1+.1,.1+9.7) SIT Tone 1 ToneName Special Information Tone - 1 TonePattern Obihai Tone Pattern Script 985-16,1428-16,1777- 16;20;(1/.380+0,2/.380+0,4/.380+0,0/0+4) SIT Tone 2 ToneName Special Information Tone - 2 TonePattern Obihai Tone Pattern Script 914-16,1371-16,1777- 16;20;(1/.274+0,2/.274+0,4/.380+0,0/0+4) Copyright 2010-2012 Obihai Technology, Inc.

  • Page 154: Ring Profile A & B Features Of The Obi Device

    The expression is a string of numeric values with the special notation '(' , ')' and ',' It has the format as per the following construct: t(on_0+off_0,on_1+off_1,on_2+off_2,on_3+off_3) Copyright 2010-2012 Obihai Technology, Inc.
  • Page 155 The above example illustrates a ringing tone comprised of two segments. Ringing is active for 0.3 seconds, followed by 2.34 seconds of silence, then ringing for 2 seconds, and followed by 1.5 seconds of silence. The above cadence operates repeatedly for 4 seconds. Copyright 2010-2012 Obihai Technology, Inc.
  • Page 156 Obihai Tone Pattern Script 440-18;30;(.3+2) Call Waiting Tone 9 ToneName Distinctive Call Waiting Tone9 User-dr4 TonePattern Obihai Tone Pattern Script 440-18;30;(.3+2) Call Waiting Tone 10 ToneName Distinctive Call Waiting Tone 10 User-dr5 TonePattern Obihai Tone Pattern Script 440-18;30;(.3+2) Copyright 2010-2012 Obihai Technology, Inc.
  • Page 157 RingPattern 60;(.8+.4,.8+4) Ring Pattern 4 RingName Bellcore-dr4 RingPattern 60;(.4+.2,.3+.2,.8+4) Ring Pattern 5 RingName Bellcore-dr5 RingPattern 60;(.2+.2,.2+.2,.2+.2,1+4) Ring Pattern 6 RingName User-dr1 RingPattern 60;(.2+.4,.2+.4,.2+4) Ring Pattern 7 RingName User-dr2 RingPattern 60;(.4+.2,.4+.2,.4+4) Ring Pattern 8 RingName User-dr3 Copyright 2010-2012 Obihai Technology, Inc.
  • Page 158 RingPattern 60;(.25+9.75) Ring Pattern 9 RingName User-dr4 RingPattern 60;(.25+9.75) Ring Pattern 10 RingName User-dr5 RingPattern 60;(.25+9.75) Copyright 2010-2012 Obihai Technology, Inc.

  • Page 159: Star Code Profile Features Of The Obi Device

    $LBP1 = Loopback RTP packets once in the next call $CDM1 = Codecs to enable in the next call (temporarily overriding any codec preferences in device configuration). Each bit of its value represents one audio codec: Copyright 2010-2012 Obihai Technology, Inc.

  • Page 160: Star Code Script Actions (Act)

    Actions are carried out one-by-one in the order as specified in the script. Restrictions:  At most 1 coll action per code.  Either 1 say or 1 call action at most per code, and it must be the last action in the script. Copyright 2010-2012 Obihai Technology, Inc.

  • Page 161: Star Code Script Examples

    After user dials *75, OBi expects one or two more digits from the user which represent a speed dial slot index (1 to 99). The 1 or 2-digit variable part is stored in the variable $code. OBi device then announces the number stores in the speed dial slot, or says “not available” if the slot is empty. Copyright 2010-2012 Obihai Technology, Inc.
  • Page 162 Default = Unblock Anonymous Calls Star Code *87, Unblock Anonymous Call, set($Bac,0) Code15 Default = Enable Call Waiting Star Code *56, Enable Call Waiting, set($Cwa,1) Code16 Default = Disable Call Waiting Star Code *57, Disable Call Waiting, set($Cwa,0) Copyright 2010-2012 Obihai Technology, Inc.
  • Page 163 *11, Night Mode, set($Opm,1) Code Code33 Default = Set OBiPLUS to Auto Night Mode *12, Auto Night Mode, set($Opm,2) Star Code Code34 Code35 Code36 Code37 Code38 Code39 Code40 Note: Code31 – Code40 requires subscription to OBiPLUS Service Copyright 2010-2012 Obihai Technology, Inc.

  • Page 164: User Settings Features Of The Obi Device

    8, and the user can dial 8*14085551234 to call 14085551234 using the given gateway. Note: At the present time, only gateways that are accessed with an OBi number can be used this way. Speed Dial Settings Speed Dials Parameter Guide: Copyright 2010-2012 Obihai Technology, Inc.

  • Page 165: User Defined Digit Maps

    It must be Label alphanumeric, not containing any spaces, and different from other user- defined or built-in digit map labels DigitMap A valid digit map Copyright 2010-2012 Obihai Technology, Inc.

  • Page 166: Sharing Files On An Attached External Usb Storage Device (Obi202 Only)

    FileFilter, and WriteEnable. These attributes are explained in the parameter table below. Anonymous: The admin can enable anonymous access where the user does not need to login. However the access is limited to read-only for anonymous users. Copyright 2010-2012 Obihai Technology, Inc.
  • Page 167 Here is a screen short of the File Sharing Settings device web page. Copyright 2010-2012 Obihai Technology, Inc.
  • Page 168 Copyright 2010-2012 Obihai Technology, Inc.
  • Page 169 Enable and Password for User N UserID is case sensitive. It must be an alphanumeric string, must not start with a number, UserID and must not contain any space. userN Maximum length is 64 characters. Copyright 2010-2012 Obihai Technology, Inc.
  • Page 170 Maximum length of this field is 256 characters. By enabling write access to the file system, you allow the user to upload, copy, remove, rename, WriteEnable cut and paste files, or create, remove, and rename directories on the USB storage device. Copyright 2010-2012 Obihai Technology, Inc.

  • Page 171: File Explorer

    On the far right of the status bar is the User ID of the current login user and the logout button, which are not shown for anonymous level login. Copyright 2010-2012 Obihai Technology, Inc.
  • Page 172 Any intermediate directory in the given path name Create a new folder with the given path name if it will be created automatically if it does not exist does not exist already; an input box will pop up Copyright 2010-2012 Obihai Technology, Inc.
  • Page 173 Copy the links (URLs) of the selected items to the to ask for confirmation before proceeding; the user clipboard of the local host may need to press Control+C for example before the Link Locations (URLs) are copied into clipboard of the local host. Copyright 2010-2012 Obihai Technology, Inc.

  • Page 174: Obi Call Routing And Digit Map

    In addition to all the call bridging functionalities, the OBi110 has a built-in physical PHONE port for hooking up analog telephones or FAX machines. OBi110 includes a set of features to support its PHONE port to make it work also as a full- featured ATA device.

  • Page 175: Call Routing - The Obi Way

    The OBi110 also comes with an Auto Attendant for helping callers to direct their calls landed on the device. When an inbound call is received on the device, it may be routed to the AA which then offers a menu of options to the caller to direct it further.

  • Page 176: Inbound Call Route Configuration

    A terminal may be a trunk or an endpoint. Abbreviated terminal names are case-insensitive number and number-to-call are literal strings, such as 14089991234 digit-map is just any proper digit map, such as (1xxx|xx.); make sure to include the enclosing parentheses Copyright 2010-2012 Obihai Technology, Inc.
  • Page 177 It says: Ring both PHONE port and AA for calls coming from 1 408 122 3330 or 1 510 331 3456, block all 800, 888, and anonymous calls, and ring the PHONE port for all other calls Copyright 2010-2012 Obihai Technology, Inc.

  • Page 178: Outbound Call Route Configuration

    := cid > target x := 1 OR 2 OR 3… (where applicable; can be omitted if it is equal to 1) cid = spoofed-caller-number target = number-to-call OR $2 embedded-digit-map = (Mlabel) OR digit-map Copyright 2010-2012 Obihai Technology, Inc.
  • Page 179 1) sp1 OR {SP1} OR {:SP1} OR {@:Sp1} (all equivalent) This rule says: Make all calls using SP1 Service, without any caller-id spoofing or digit transformation {(<#:>|911):li},{**0:aa},{***:aa2},{(Mpli):pli},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>( Mpp)):pp} This is the default OutboundCallRoute for the PHONE port. It says: Copyright 2010-2012 Obihai Technology, Inc.

  • Page 180: Digit Map Configuration

    NOT needed or allowed for the literals in this context; special characters may be used here as they do not apply in this context either . Elements can be empty, in which case the ‘:’ may be omitted. This case is useful for inserting Copyright 2010-2012 Obihai Technology, Inc.
  • Page 181 <**1:>1408xxxxxxx – Matches any number that starts with **11408 followed by 7 digits. OBi removes the **1 prefix when making the call *74(x|xx) – Matches any number that starts with *74, followed by 1 or 2 digits Copyright 2010-2012 Obihai Technology, Inc.

  • Page 182: Matching Against Multiple Rules In Digit Map

    Indefinitely Matched (IM) – The rule matches the accumulated input sequence indefinitely, with a variable length such that the rule can potentially stay as IM as more matching digits are entered. Example: 011853 indefinitely matches the rules xx., 011xx., <011:>xx. Copyright 2010-2012 Obihai Technology, Inc.
  • Page 183 7-digit when the (short) interdigit expires. On the 8 digit and beyond, however, the DMP will consider the first rule only and return the accumulated digits as is when the (long) interdigit timer expires. Now add a S4 timer to the 2 rule: Copyright 2010-2012 Obihai Technology, Inc.

  • Page 184: Invoke Second Dial Tone In Digit Map

    = Second Dial Tone fb = Fast Busy Tone ho = Holding Tone od = Outside Dial Tone pr = Prompt Tone rb = Ringback Tone ro = Reorder Tone (same as fast busy) Copyright 2010-2012 Obihai Technology, Inc.

  • Page 185: User Defined Digit Maps

    <a>,<b>,<c>,<d> is a 1-3 digit pattern in the range 1–255 that identifies one byte of an IP address. The dialed number will be translated into <user-id>@<a>.<b>.<c>.<d> and <user-id>@<a>.<b>.<c>.<d>:<port> respectively. Here are some examples: 1234*192*168*15*113 maps to 1234@192.168.15.113 123456*192*168*15*180*5061 maps to 123456@192.168.15.180:5061 Copyright 2010-2012 Obihai Technology, Inc.

  • Page 186: Specifications & Environmental Characteristics Of The Obi Device

    Secure Remote Firmware Update Encrypted Binary File via TFTP or HTTP + Dedicated User Name & Password Customization OBi-ZT: Obihai Zero-Touch Automatic Customization & Configuration ** Call History (CDRs) Call Detail Records on OBi Web Page, Export to XML LED Indications...
  • Page 187 SIP Proxy Redundancy – Local or DNS Based SVR, Primary & Secondary Fallback List Restrict Source IP Address Maximum Number of Sessions – Independent per Service Trunk Groups (4) Voice Gateway – Direct Dialing (8) G.711 A-Law G.711 µ-Law Copyright 2010-2012 Obihai Technology, Inc.
  • Page 188 Caller ID Number Caller ID Name (Alphanumeric) Call Waiting Maximum Session Control Call Forward - Unconditional Call Forward on Busy Call Forward on No Answer (Ring Count Configurable) Call Transfer Enable / Disable Anonymous Call Block Copyright 2010-2012 Obihai Technology, Inc.
  • Page 189 Yes – Located on Bottom of Case LEDs 3 – Power + Status, Ethernet Activity, Phone LED Indications Power On, Device Status, Upgrade in Progress Status, Packet RX/TX, Phone Port Status Certifications FCC Part 15 Yes – Class B A-Tick Copyright 2010-2012 Obihai Technology, Inc.
  • Page 190 1-Year Hardware (Limited) Engineering & Design Location California, USA Country of Origin China HST Code 8517.62.00 All content subject to change. Data Sheet State This data sheet is not a warranty. Data Sheet Version 140911.100.1 Copyright 2010-2012 Obihai Technology, Inc.
  • Page 191 On-Hook Speed: 0.5ms, 3ms (ETSI), 26 (AU) Tip-Ring Voltage: 3.1v, 3.2v, 3.35v, 3.5v Min Operational Loop Current: 10mA, 12mA, 14mA, 16mA Current Limiting Enable Channel Tx Gain Channel Rx Gain Line In-Use Voltage Threshold Line In-Use Current Threshold Copyright 2010-2012 Obihai Technology, Inc.
  • Page 192 Secure Remote Firmware Update Encrypted Binary File via TFTP or HTTP + Dedicated User Name & Password Customization OBi-ZT: Obihai Zero-Touch Automatic Customization & Configuration ** Call History (CDRs) Call Detail Records on OBi Web Page, Export to XML Power, Device Status, Upgrade in Progress Status, Ethernet Activity, PHONE Port Status,...
  • Page 193 STUN SUBSCRIBE / NOTIFY Framework (RFC 3265) NOTIFY Dialog, Line Status SUBSCRIBE Message Summary VoIP NAT Interworking DATE Header Support ALERT-INFO Header Support Remote-Party-ID (RPID) P-Asserted-Identity (PAID) RTP Statistics in BYE Message Media Loopback Support Copyright 2010-2012 Obihai Technology, Inc.
  • Page 194 Call Progress Tones Stutter Tone Howling Tone Prompt Tone Call Forwarded Tone Conference Tone SIT Tones (1-4) Ringing & Call Waiting Tone Configuration Ring Patterns (10) - Configurable Call Waiting Tone Patterns (10) - Configurable Copyright 2010-2012 Obihai Technology, Inc.
  • Page 195 -25º to 85º C (-13º to 185º F) Operating Humidity 10% to 90% Non-condensing Non-operating Humidity 10% to 90% Non-condensing Physical Attributes Dimensions 11.5 x 11.0 x 3.0 centimetres (width x depth x height) 4.5 x 4.2 x 1.2 inches Copyright 2010-2012 Obihai Technology, Inc.
  • Page 196 Quick Start / Installation Guide Documentation User / Administrative Guide Implementation Guide for Service Providers ** OBi110 Voice Service Bridge and Telephone Adapter Power Adapter Package Contents 1 x RJ-45 Ethernet Cable (80 inches / 203 centimeters) 1 x RJ-11 Telephone Cable (45 inches / 113 centimeters)
  • Page 197 Secure Remote Firmware Update Encrypted Binary File via TFTP or HTTP + Dedicated User Name & Password Customization OBi-ZT: Obihai Zero-Touch Automatic Customization & Configuration ** Call History (CDRs) Call Detail Records on OBi Web Page, Export to XML LED Indications...
  • Page 198 - Upstream Data Rate Allocation - Highest Priority (Voice) Bandwidth Allocation - Priority Class Assignments (4) for Bandwidth Allocation - DiffServ Code Point (DSCP) to Priority Class Mapping VPN Pass-Thru - IPsec ESP (IP Security encapsulating security payload) Copyright 2010-2012 Obihai Technology, Inc.
  • Page 199 Tone Profile per SIP SP and OBiTALK service Ring Profile per SIP SP and OBiTALK service Star Code Profile per SIP SP and OBiTALK service Full Duplex Audio G.165, 168 Echo Cancelation VAD – Voice Activity Detection Copyright 2010-2012 Obihai Technology, Inc.
  • Page 200 Activate Call Forward on Busy Deactivate Call Forward on Busy Activate Call Forward on No Answer Deactivate Call Forward on No Answer Activate Block Anonymous Calls Deactivate Block Anonymous Calls Activate Call Waiting Deactivate Call Waiting Copyright 2010-2012 Obihai Technology, Inc.
  • Page 201 36.0 cm x 33.0 cm x 26.8 cm – 14.2 in x 13 in x 10.5 in Carton Weight 8.2 Kilograms / 18 pounds Cartons Per Std. 20 / 40 ft Container 896 / 1,848 Cartons – Non-palletized Miscellaneous Requirements Active Internet Connection Copyright 2010-2012 Obihai Technology, Inc.
  • Page 202 Technology will not be liable to you or any third party for any costs or damages arising directly and or indirectly from the use Obihai’s hardware & software including without limits any damage, or for any loss whatsoever. Copyright 2010-2012 Obihai Technology, Inc.

This manual is also suitable for:

Obi100Obi202Obi302

Table of Contents