Obihai OBi100 Administration Manual page 113

X_ProxyClientConfig
where <obi-number> is the 9-digit OBi number of this device,
<sp-user-agent-port> this SP's X_UserAgentPort parameter.
For example, SP1 has a local_client with the userid 4086578118
and the client wants to make and receive calls using SP3 which is
set up for Google Voice. The SP1 InboundCallRoute shall include
the following rule:
{4086578118>:sp3}
The SP3 InboundCallRoute shall be:
{sp1(408657118@local_client)}
Note: Option not available on OBi100/OBi110.
A list of IP phone attributes separated by a space or newline
character for provisioning an IP Phone with the given MAC
address and model number. Each attribute has the syntax
<attribute-name>="<attribute-value>"
with no white space before and after the '=' sign. Every character
within the pair of double quotes is taken as the attribute's value.
The following attributes are supported:
- mac: Required. The MAC address of the IP Phone in 12-hex-
digit format, such as "008e3c123456"
- model: Required. The make/model of the phone, such as
"Cisco/SPA504G"
- ext: Required. The extension number assigned to the phone,
such as "104". The account will be installed on Ext 1 of the
phone
- dm: Optional. The dial plan on Ext 1 of the phone, such
as"([1-5]xx|[67][0-9*][0-9*]|9,1 xxx xxx xxxx|9,011
xx.|8,<:1408>[2-9]xxxxxx|8,1 xxx xxx xxxx|8,011 xx.)"
- mohs: Optional. The extension number of the MOH Server,
such as "69*"
- bn: Optional. A function button to be configured with the
attributes that follow. Valid values are "1", "2", ... up to the
maximum number of programmable function buttons on
that phone model. Sidecar buttons are numbered the same
way with 100 added to the button number, such as "101",
'102", ..., "132 (there are 32 buttons per sidecar). A bn
attribute is followed by one or more of the fn, va, and la
attributes. The end of a bn section is marked by another bn
attribute. You must insert a bn="0" attribute after the last
button
- fn: Required. A code that represents the function served by
the current button. This attribute must be located
somewhere between two bn attributes. The following codes
are defined:
o
"Ext 1": A line key for calls on phone's Ext 1 account
o
"Speed Dial": A speed dial. Requires a va attribute
with the target number as the value
o
"BLF": Classic BLF. Requires a va attribute with the
extension number to monitor as the value
o
"Send To Leave VM": Blind transfer the current
Copyright 2010-2013 Obihai Technology, Inc. 113