Obihai OBi100 Administration Manual page 153

Obi1 series, obi2 series, obi3 series
Hide thumbs Also See for OBi100:
Table of Contents

Advertisement

CallForwardUnconditionalNumber
CallForwardOnBusyEnable
CallForwardOnBusyNumber
CallForwardOnNoAnswerEnable
CallForwardOnNoAnswerNumber
CallForwardOnNoAnswerRingCount
AnonymousCallBlockEnable
DoNotDisturbEnable
from the phone using a Star Code
Directory number to forward all incoming calls on
this service unconditionally. Maximum Length is
127 characters.
Note: It is possible for a user to set this parameter
from the phone using a Star Code
Enable call forwarding of all incoming calls when
the device is busy. If CallForwardOnBusyNumber is
blank, this parameter is treated as if it has been set
to No. Device is considered busy if one of the
following conditions holds:
DND (Do Not Disturb) Service is enabled on this
service
If the call is routed to the PHONE port when the it
is in a busy state (such as ringing, dialing, playing
reorder tone, or already having 2 calls in progress)
Note: It is possible for a user to set this parameter
from the phone using a Star Code
Directory number to forward all incoming calls on
this service when the device is busy. Maximum
Length is 127 characters.
Note: It is possible for a user to set this parameter
from the phone using a Star Code
Enable call forwarding of all incoming calls when
the call is not answered after a period as specified
in CallForwardOnNoAnswerRingCount. If
CallForwardOnNoAnswerNumber is blank, this
parameter is treated as if it has been set to No.
Note: It is possible for a user to set this parameter
from the phone using a Star Code
Directory number to forward all incoming calls
when the call is not answered after a period
specified in CallForwardNoAnswerRingCount
Note: It is possible for a user to set this parameter
from the phone using a Star Code
Number of rings to be considered by the device as
no answer to an incoming call.
Note: 1 ring is approximately 6s
Enable blocking of Anonymous Calls on this
service. If enabled, anonymous incoming calls will
be ignored by the OBi device.
Note: It is possible for a user to set this parameter
from the phone using a Star Code
Enable Do Not Disturb Service. If enabled, all
incoming calls on the PSTN line will be treated with
busy handling by OBi device.
Copyright 2010-2013 Obihai Technology, Inc.
No
No
2
153

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Obi110Obi200Obi302Obi202Obi300

Table of Contents